Wifi activation - Phil1988/FreeDi GitHub Wiki

After installing FreeDi, the Wi-Fi dongle may not be enabled by default.😮 This is because there are different wifi dongles used with this printer series, and Qidi likely pre-installs them. Since I do not have this option, the driver for the specific wifi dongle must be installed manually, followed by switching the device from "mass storage mode" to Wi-Fi operational mode using usb_modeswitch, along with other necessary adjustments.

To simplify this process, I have created an installation script that automates all the necessary steps.

Steps to activate wifi

  1. Run the Installation Script
    To start the process, open the terminal and enter: cd ~/FreeDi && ./install.sh

  2. Choose the Correct Mainboard
    Initially, you will be asked if you have an original Qidi mainboard. This is a safety mechanism for users who may have installed a different mainboard, as the script could overwrite certain settings. If you have a Qidi mainboard (99% of you), answer "y" (yes).

  3. Enter the User Password
    After selecting your mainboard, you will need to enter the password for the user (default: makerbase).

  4. Wi-Fi Dongle Setup
    Once the script completes, your Wi-Fi dongle will be activated and configured.

  5. Connect to Wi-Fi
    Go to "Gear Icon" -> Network: You can now view the list of available Wi-Fi networks on the display and connect to your preferred network. image

By following these steps, your Wi-Fi dongle will be enabled, allowing you to connect to your network and access the printer remotely.