Keeping your Printer Updated - OpenNeptune3D/OpenNept4une GitHub Wiki

This page provides instructions on how to update OpenNept4une, 3rd-party modules & system packages.

Updating OpenNept4une & 3rd-party modules

  1. Enter fluidd's Settings tab (the COG in the left toolbar)
  2. Click the option Software Updates
  3. Click Check for Updates
  4. Once checked click Update All
  • Note: fluidd may incorrectly report outstanding OS Packages

Updating System / OS Packages

  1. Access your printer via SSH (ssh mks@<your printer ip> password makerbase)
  2. Execute the following command
sudo apt update && sudo apt upgrade -y

Updating to the latest OpenNept4une printer.cfg

Here

Updating touchscreen UI version (Only if prompted)**

  • Download Here
  • Place the downloaded file on a FAT32-formatted microSD
  • Safely shutdown & power-off your printer
  • Remove the 4 screws from the back of the touchscreen unit
  • Insert the microSD into the touchscreen's internal microSD slot
  • Power on your 3D printer & the touchscreen should display the upgrade process
  • Once complete, remove the microSD from the touchscreen & restart the printer