UP1 Breadboardadapter - OpenKNX/OpenKNX GitHub Wiki

Table of Contents Description Ressources Usage Sourcing Assembly Pictures

The UP1-Breadboardadapter is part of the OpenKNX UP1 system mainly meant for developing purposes. With the UP1-Breadboardadapter a UP1-Controller2040 can be connected to a standard 2.54 breadboard.

• KiCAD project files

Plug the UP1-Breadboardadapter into a 2.54 breadboard and then plug the UP1-Controller2040 into the UP1-Breadboardadapter.

You can get a PCB here for a donation.

Gerber files V00.01 are availible in the repository.

Parts: Reichelt BOM

Use 1.27 female header and 2.54 pin header or adapt to your needs.