Prepping Tegra TX1 for use on robot - MDHSRobotics/TeamWiki GitHub Wiki

Home / References

#Prepping Tegra TX1 for use on robot

Based on online research, it appears that the Tegra TX1 dev board is sensitive to power fluctuations that normally occur on a robot. See references below:

• Chief Delphi thread from season 2016 describing teams having issues and how they resolved it. See posts #43 - #45
• NVidia recommended fix referenced in the above post. See post #8

###Fix description: From the NVidia fix recommendation:

• The sensitivity of the circuit can be reduced by adding a 4.7uF 35v ceramic cap in parallel with R105 and change C49 (0603) to 1uF 25v or greater.