3D Printing Filaments Temperature - MDHSRobotics/TeamWiki GitHub Wiki

Filament

  • PLA (Polyactic Acid)
  1. Hot End 195-225
  2. Bed 60-70
  • ABS (Acrylonitrile Butadiene Styrene)
  1. Hot End 235-260
  2. Bed 110-130
  • PC (Poly Carbonate)
  1. Hot End 300
  2. Bed 140-145
  • Hydrofill
  1. Hot End 235-250
  2. Bed 100-130
  • Ninjaflex (Polyurethane Thermoplastic Elastomer)
  1. Hot End 210-240 start at 220
  2. Bed 60
  • Iglidur |180-PF (Tribo filament)
  1. Hot End 220 (250-260)
  2. Bed 95 (90-110)

List created by Rafael Gastelum if you have any questions please email [email protected] or [email protected]

For Default settings in Apex go to this link: https://drive.google.com/drive/folders/1CZsMHE1WyAPGIQvdwc-V1ywBMMxcdxNC