Temperature Jump Apparatus

The device has been designed and built in house.

There are two temperature blocks, which are set to a temperature using a standard controller. The cell is pressed against one, a length of time is allowed to pass to set the temperature, the block in contact with the cell is then swapped for the other block, which will be at a different temperature.

Communication

• Device uses 9-way male moxa with null modem.
• Needs longer timeouts to correctly read the status command.

Note: the Temperature Jump apparatus IOC will be included in the release after v12.0.1. If anyone needs to use it before the next is deployed we can easily patch the fixed protocol file over for it.