TPG26x - ISISComputingGroup/ibex_developers_manual GitHub Wiki
Wiki > The Backend System > IOCs > TPG26x
The TPG26x is shorthand for multiple devices with the same interface. They all measure pressure based on sensors that are plugged in. See https://www.pfeiffer-vacuum.com/en/products/measurement/activeline/controllers/?detailPdoId=5724 manual is also in C:\LabVIEW Modules\Drivers\Pfeiffer TPG26x\Documentation.
Simulator PVs are:
| Name | Description |
|---|---|
SIM |
1 to switch simulation on, 0 off |
SIM:UNITS |
1-3 for the different units |
SIM:X:PRESSURE |
To set the pressure readback (X is 1 or 2) |
SIM:X:ERROR |
To set the error, 0 - 6; 0 is no error (X is 1 or 2) |
Set up the port with in the st.cmd and run the simulator. There are several backdoor command to set the internal state, telnet to the emulator and then issue:
| Command | Argument | Description |
|---|---|---|
emulator:set:pressureX |
Set the pressure of sensor X (X 1 or 2) | |
emulator:set:errorX |
<error 0-6> | Set the error of sensor X (X 1 or 2) |
emulator:set:units |
<error 1-3> | Set the units |