MUSR Instrument Details - ISISComputingGroup/ibex_developers_manual GitHub Wiki
This page collects information that will be useful for the implementation of the IBEX control system on MUSR.
Background & Timeline
MUSR is a general purpose muon spin rotation spectrometer at ISIS, on TS1. However, the emphasis of the experimental work conducted is investigating magnetism and superconductivity. The MUSR web page describes the background to the instrument.
Control System
MUSR will migrate from the SECI control system to the IBEX control system in MMMMMMMM YYYY.
MUSR Equipment
The equipment listed below is used on MUSR. Please add new information (e.g. new items of equipment, new notes, information about drivers, etc. to this table).
Manufacturer | Model | Type | Connection | Driver | Notes |
---|---|---|---|---|---|
ISIS | DAE 2 | Detector Electronics | Ethernet | see DAE note | |
GALIL | DMC2280 | Motion Controller | Ethernet | EPICS | see motion note |
Eurotherm | Temperature Controller | All models at ISIS | RS-232 | EPICS | see Eurotherm note |
ICE | ICECube Dilution Fridge | Oxford ICE Cube | RS-232 | see Oxford ICE Cube note | |
CAEN | V895 | Discriminator | ??? | see CAEN note | |
Oxford Instruments | Triton | Dilution Fridge | RS-232 | see Oxford Instruments note | |
Oxford Instruments | Mercury | Temperature Controller | RS-232 | see Oxford Instruments note | |
Oxford Instruments | Heliox | He3 Refrigerator | see Oxford Instruments note | ||
Lakeshore | 372 | Temperature Controller | see Lakeshore note | ||
LakeShore | 340 | RS-232 | EPICS | see LakeShore note | |
Thurlby | EX355P | PSU | ??? | see Thurlby note | |
Danfysik | 8000 | PSU | RS232 | DFKPS | see Danfysik note |
see Gossen note | |||||
MetroLab | PT2025 | Teslameter | ??? | see MetroLab note |
Note: DAE
See multi-detector and single-detector below.
Note: Motion
There is a project relating to the motion on the South Side Muons in progress, this information may be out of date
Note: Choppers
MUSR does not have a chopper.
Note: Jaws
Provide information about MUSR jaws.
Note: Eurotherm
Eurotherms are used to control temperature Orange Cryostat, CCR and Furnace devices.
Note: Oxford ICE Cube
- The ICE Fridge is a dilution fridge.
- N.B. It is not an Oxford Instruments device. It is from a different manufacturer.
- It cannot be compared to other models of dilution fridge.
- The ICE control PC is referred to as an ICECube.
- This PC runs Windows XP. It should not be connected to the ISIS network.
- Communication with the equipment is via serial and a MOXA unit.
- The dilution fridge temperature at low temperatures is controlled via a Lakeshore 370.
- There is only one ICE dilution fridge which is used on MUSR mainly. It is available for EMU.
- See ticket #3876
Documentation can be found at : C:\LabVIEW Modules\Drivers\ICEOxford\ICECube\Documentation
LabVIEW client can be found at : C:\LabVIEW Modules\Drivers\ICEOxford\ICECube\ICECube - Client.llb\ICECube - Client.vi
Note: CAEN
The CAEN V895 is a 16-channel Leading Edge Discriminator.
Note: Oxford Instruments
- Dilution fridge: models to be determined.
- Triton LabVIEW Driver : C:\LabVIEW Modules\Drivers\Triton
- Triton Documentation : C:\LabVIEW Modules\Drivers\Triton\Documentation
- See also #2915
- Support for Mercury Temperature Controller was created as part of #2840
- Heliox devices are He3 Sorption Refrigerators. See #3739 and #4549.
Note: LakeShore
- Model 340: this model is now obsolete, having been replaced by the 336 and 350 models.
- On muon instruments, the Triton fridges have an additional Lakeshore controller (the 372) to allow control and continuous readout of the sample temperature (the OI software doesn’t allow this using the in-built Lakeshore, despite the unit having a dedicated channel for the sample thermometry).
- Model 372 temperature controller.
- There are EPICS drivers for a variety of Lakeshore temperature controllers.
Note: Thurlby
- Thurlby EX355P PSU - see #3784
- Thurlby Thandar Instruments EX355P PSU
Note: Danfysik
Need to check if MUSR does use Danfysik 8000 or a different model of PSU.
- Danfysik Power Supplies: model 8000 appears to have been superseded by model 8500.
- User and Software Manuals for System 8500.
- See #1208 for comms settings.
Note: Gossen
Gossen 64D 42P PSU- Gossen PSU is no longer used on MuSR (superseded by Thurlby)
Note: MetroLab
MUSR Notes
MUSR has the following specialist panels:
- MUON Front End Magnet Monitoring (IOC)
- MUON Front End Control (IOC)
- MUSR Field Viewer (IOC)
- MUSR Lakeshore 340 (Custom Panel)
- See see Lakeshore note. Check functionality against existing MUSR VI.
- MUSR MUON Jaws (IOC)
- MUSR CAEN (IOC)
- See see CAEN note. Check functionality against existing MUSR VI.
- MUSR Transverse Field (TTI EX355P or
Gossen 64D 42P PSU)- See see Thurlby note. Check functionality against existing MUSR VI.
See see Gossen note. Check functionality against existing MUSR VI.
- HIFI MetroLab PT2025
- See see MetroLab note. Check functionality against existing MUSR VI.
- MUON Magnets - Danfysik
- See see Danfysik note. Check functionality against existing MUSR VI.
- MUON Magnets - MUON Rotation Control
- MUON Magnets - Zero Field Controller
MUON TRMC2(TRMC2 is obsolete, no longer used)- MUSR Steering - Muon Steering magnets
MUSR has the following motion control items:
sample changer (2-axis)not needed (configuration item probably accidentally copied from another instrument)transmission monitornot needed (configuration item probably accidentally copied from another instrument)
MUSR also has the following system:
- MUON Script Generator (muongui.exe)
MUSR SECI Configs
Document information about MUSR SECI configs here.
Configuration Name | Sub-Configurations | Last Accessed | Required |
---|---|---|---|
EMU_place_holder1.conf | - | dd/mm/yyyy | - |
EMU_place_holder2.conf | - | dd/mm/yyyy | - |
MUSR Genie Scripts
Similarly, Document information about MUSR SECI Genie scripts here.
MUSR configs from EMU
Configurations have been removed that were migrated from SECI + EMU as they are being phased out or have not been in use. Commit 63303d94400cd0270b3c07357a08cbdf5945d8e8
should still contain the configurations before removal.