What it is for

Access security, alternatively known as "manager mode", is used to prevent users from writing values to an IOC while letting instrument scientists assign values.

How to set it up

Here are the basic steps to follow:

• For each record in the IOC which should be protected, add an ASG field
• For instrument specific DB records, it is ok to hard-code the ASG (for example, field(ASG, "MANAGER"))
• For general IOCs, the access security group should be defined as a macro (e.g. field(ASG, "$(ASG=DEFAULT)")). Giving the ASG macro a default value of DEFAULT will mean that existing instruments using this IOC will be unaffected.
• The ASG macro can then be supplied from an st.cmd, or a globals.txt as appropriate. The two useful values for the ASG macro for setting up access security are DEFAULT (acts as normal) and MANAGER (with access security).
• OPIs that might be protected by access security should have the access security widget in them. This can be copy-pasted from the template OPI.
• The access security widget in the OPI depends on a PV provided from the IOC in the following way:

record(scalcout, "$(P)MANAGERMODE")
{
    field(ASG, "READONLY")
    field(DESC, "Non-zero if manager is required for this IOC")
    field(PINI, "YES")
    field(INPA, "$(PVPREFIX)CS:MANAGER CP")
    field(BB, "$(ASG)")
    field(CALC, "A = 0 && BB = 'MANAGER'")
    field(OOPT, "Every Time")
}

• Note that you will need to pass in $(PVPREFIX) from your st.cmd for this to work!

(If you need a "real world" example, the jaw set on Polaris has been set up using access security.)

Further information

The access security rule is defined in C:\Instrument\Apps\EPICS\support\AccessSecurity\master\default.acf.

This looks at a PV which is $(P)CS:MANAGER. If the PV is set to 1 then manager mode is enabled, if it is 0 then manager mode is disabled. The GUI simply sets this PV to 1 or 0 as you enter or exit manager mode.

To check whether access security is working properly it can be useful to use a cainfo <pv>, this tells you whether you currently have read, write, or both permissions.

Even more information

https://github.com/ISISComputingGroup/ibex_developers_manual/wiki/EPICS-basics#Access-Security

https://github.com/ISISComputingGroup/ibex_developers_manual/wiki/Access-Gateway

Past approaches / future extensions

In future it may be desirable to implement a "baton" system which allows users to request exclusive access to an instrument. There was a small amount of front-end code related to this removed in this commit. The back end for this was never implemented.