• Home
  • Yeti Link Expansion Module
    • Firmware Updates
      • Updating Yeti Link Firmware

---

To update the Yeti Link firmware you'll need one of the following Yeti Models with the accompanying firmware:

• Yeti 1400 Lithium with WiFi - Firmware v1.5.7 or newer
• Yeti 3000 Lithium with WiFi - Firmware v1.5.7 or newer
• Yeti 1500X - Firmware v1.5.7 or newer
• Yeti 3000X - Firmware v1.5.7 or newer
• Yeti 6000X - Firmware v1.5.7 or newer

1. Cloud Connect with the Yeti using the Goal Zero Power App
   • Ensure Yeti is online by toggling a port and seeing that the port state syncs with the app
   • Ensure Yeti is on the latest firmware
     • Go to Dashboard > Yeti Settings > Device Information
2. Connect Yeti Power and communication cable to the Yeti Expansion bay
3. Within a few moments, if the Yeti is online, the Yeti Link Firmware Update will start
   • The Yeti will enter the PREPARING UPDATE state
4. Be patient - Allow the Yeti to install the firmware
   • The progress should be shown the Yeti LCD
   • It will take 3-10 minutes to complete depending on Internet stability and Yeti App Cloud traffic