Yeti Link - GoalZero26503/yeti-wifi-public GitHub Wiki
-
Home
- Yeti Link Expansion Module
- Fixes Link firmware update for Yeti 1400/3000 Li models
- Fixes bug restoring saved mode after reboot
- Adds support for vehicles with Smart Alternators
- Adds detection/protection for bad cabling in Tank mode
- Fix Yeti 1400/3000 mode syncing
- Allows user to change between car and tank mode via the app
- Shows LED blink effect when mode or tank capacity is changed
- Fixes LED UI blinking
- Reduce audible noise while charging
The Yeti Link Expansion Module has two operating modes: Car Mode and Tank Mode. The operating mode can be changed via the Goal Zero App or by pressing the pinhole button 4 times on the Yeti Link.
Tank Mode is designed for use with Goal Zero Lead Acid Expansion Tanks.
When the Link is switched into Tank Mode, it will blink the LED "ladder" effect.
Car Mode is designed for use in vehicle applications. Using a Goal Zero Yeti Link Expansion Module in Car Mode will allow the Yeti to charge from a vehicle's alternator.
When the Link is switched into Car Mode, it will blink the LED "blink all" effect.