Required Parts - Gepardec/Hogarama GitHub Wiki

If you are interested in setting up your own Habarama unit at home, you will need the following parts:

• Raspberry Pi 3 Model B+
• (optional) Raspberry Pi Casing
• Micro USB power supply 2.5A
• microSD card
• Jumper Wire Female to Male 10Pin 20cm
• Jumper Wire Male to Male 10Pin 10cm
• Jumper Wire Female to Female 10Pin 20m
• Breadboard 400 Pins - 8.3 x 5.5 cm
• Sparkfun Soil Moisture Sensor
• Strand wire 1 x 0.75 mm² black 5m
• Strand wire 1 x 0.75 mm² red 5m
• Strand wire 1 x 0.75 mm² yellow 5m
• ADC MCP3008-I/P
• Submersible pump
• Relay
• 6-12V Power Supply for pump
• Water reservoir
• Tube for pump