Raspberry takes care of sending data to the Cloud. The connection has following parts:

• RaspberryPi with sensor: Reads data from the real world.
• Client: Transforms input from Raspberry pins to Hogajama accepted format.
• MQTT Broker: MQTT is used as a transport protocol between the Client and Hogajama.
• Hogajama: Stores data und displays it to the users.

This data is sent from the Raspberry Pi to the cloud.

MQTT Topic: habarama

{
  "sensorName": <sensorName>,
  "type": <sensorType>,
  "value": <value>,
  "location": <location>,
  "version": <version>
}

This command is sent from the cloud to the Raspberry Pi.

MQTT Topic: actor.<ActorLocation>.<ActorName>

{
   "name": "<ActorName>",
   "location": "<ActorLocation>",
   "duration": duration in seconds
}

Located in $project-repository/Habarama/client/python/plant.py.

• Enabled hardware SPI
• Python dependencies:
  • build-essential
  • python-pip
  • python-dev
  • python-smbus
• Adafruit_Python_GPIO
• Adafruit_Python_MCP3008
• eclipse/paho.mqtt.python

The client reads configuration form habarama.json located in current working directory.

{
  "brokerUrls": ["broker1", "broker2"],
  "sensors": [
    {
      "name": "<sensor.name>",
      "type": "<sensor.type>",
      "location": "<sensor.location>",
      "channel": <sensor.channel>,
      "pin": <sensor.pin>
    }
  ],
  "actors": [
    {
      "name": "<actor.name>",
      "location": "<actor.location>",
      "type": "<actor.type>",
      "pin": "<actor.pin>"
    }
  ]
}

• brokerUrls: Array of MQTT broker URLs.
• sensors: Array of sensors connected to Raspberry Pi.
• sensors.name: Unique name for sensor for given location and type. Type: String
• sensors.type: Describes which kind of values the sensor reads. Type: String
• sensors.location: Where is sensor located. Type: String
• sensors.channel: The channel on MCP3008 chip. Type: Number
• sensors.pin: To which pin is the sensor connected. Type: Number
• actors: Array of actors connected to Raspberry Pi.
• actors.name: Unique name for actor for given location. Type: String
• actors.location: Where the actor is located. Type:String
• actors.type: Describes the kind of actor. Currently possible values are supported: gpio | console. Type: String
• actors.pin: To which pin the actor is connected. This is only required in case actors.type is gpio. Type: Number