SIO Command $D0 Base64 Encode Input - FujiNetWIFI/fujinet-firmware GitHub Wiki

This is a command for Device $70 - The FujiNet Device itself (see SIO-Commands-for-Device-ID-$70).

Base64 Encode Input ($D0)

Description

Puts data in the FujiNet's Base64 input buffer for decoding by Base64 Encode Compute, which should be the function called after this command has input all the data to encode. This command can be called as many times as needed to input data at up to 65535 bytes at a time.

Because DAUX is used to tell the FujiNet how many bytes to expect, both DBUF and DAUX must be set to the same value.

Firmware version required: 1.1 (2023.08.22) +

Parameters

DCB	Value
DDEVIC	$70
DUNIT	$01
DCOMND	$D0
DSTATS	$80
DBUF	A buffer as big as specified by DBYT/DAUX
DTIMLO	$03
DBYT	number of bytes to input
DAUX1	number of bytes to input (LO)
DAUX2	number of bytes to input (HI)

Examples

CC65

unsigned char base64_encode_input(char* buf, unsigned short len)                                                                     
{                                                                                                                                    
  OS.dcb.ddevic   = BASE64_DEVICE;                                                                                                   
  OS.dcb.dunit    = 1;                                                                                                               
  OS.dcb.dcomnd   = 0xD0;                                                                                                            
  OS.dcb.dstats   = 0x80;                                                                                                            
  OS.dcb.dbuf     = buf;                                                                                                             
  OS.dcb.dtimlo   = BASE64_TIMEOUT;                                                                                                  
  OS.dcb.dbyt     = len;                                                                                                             
  OS.dcb.daux     = len;                                                                                                             
  siov();                                                                                                                            
                                                                                                                                     
  return OS.dcb.dstats; // Return SIO error or success.                                                                              
}