PKSM Setup - FlagBrew/local-gpss GitHub Wiki
Important
You must at-least PKSM 10.1.2 installed (PKSM 10.1.3 or higher STRONGLY recommended) for this guide to work for you.
You can see the version of PKSM you are running on the settings page,look at the top of the top screen:
Open the settings page on PKSM, and look for the API tab button
When you click it, it'll take you to the API settings page.
Click on the button for editing the server URL, it'll bring up a keyboard for you to enter the URL.
Important
Please pay attention to the hint text, the URL you enter MUST end with a / otherwise this will not work.
Now enter the http://<IP>:<PORT>/ as the value (the IP is the address of your machine running local GPSS, and the port is the you configured, if you had followed the previous steps you should have the info you need).
For example purposes, this what it might look like when you have it filled out:
Click OK and you should be good to go.
To test this, head over to the storage page on PKSM, and click the Cloud Button, if it brings up cloud boxes, congratulations you have Local GPSS set up and are ready to go! (The boxes may be empty if you didn't use the gpss.db from the release, see this guide for how to use it)
If you get an error, please check the troubleshooting page and if after that you still are unable to get it working, please join the FlagBrew server and ask for assistance in the #gpss-general channel.