Objective 7: Basic Power - DartisXUI/Vanilla-Plus-Ultra GitHub Wiki

Requirements:

  • Spruce Sapplings (fastest resin production rate)
  • 1-4 x Arboreal Extractors per Spruce Tree
  • NOTE: Arboreal Extractors do not require power
  • NOTE: Each Extractor must be placed at the base of the Tree
  • NOTE: Trees must be naturally grown – not built manually
  • NOTE: Tree must stay on at least one block of Dirt
  • NOTE: Dark/Oak Trees produce Sap with this setup
  • Enough Fluid Conduit (go Pressurized Fluid Conduit if you can)
  • Enough Energy Conduits
  • 1 x Fraction Still
  • 1 x Steam Dynamo
  • 1 x Energy Cell
  • 1 x Aqueous Accumulator
  • 1 x Coal or Charcoal
  • 1 x Compression Dynamo

Setup:

  1. Pump Resin from Arboreal Extractors into Fractioning Still
    • This will Process Resin into Rosin (a solid fuel source) if given Power
  2. Setup Aqueous Accumulator to pump water into the Steam & Compression Dynamos
  3. Connect Energy Conduits from Steam Dynamo to Energy Cell
  4. Connect Energy Conduits from Energy Cell to Fractioning Still
  5. Add 1 Coal or Charcoal to Steam Dynamo to kick-start the system
    • The Steam Dynamo will consume 1 Rosin to generate 8,000RF at a base rate of 40RF/t Feed the Fractioning Still’s byproduct of Tree Oil into the Compression Dynamo
    • The Compression Dynamo will consume 1 Bucket of Tree Oil for 1,000,000RF at a base rate of 4RF/t