Page Index - ControlBits/EMIT GitHub Wiki
53 page(s) in this GitHub Wiki:
- Home
- 1. Getting EMIT ready for firmware development
- Please reload this page
- 1. Getting EMIT ready for firmware development (Arduino)
- Please reload this page
- 10. Exploring EMIT's GPIO Expansion Connector
- Please reload this page
- 10. Exploring EMIT's GPIO Expansion Connector (Arduino)
- Please reload this page
- 2. Writing and uploading firmware to EMIT
- Please reload this page
- 2. Writing and uploading firmware to EMIT (Arduino)
- Please reload this page
- 3. Measuring temperature & humidity with the AM2302
- Please reload this page
- 3. Measuring Temperature & Humidity with the AM2302 (Arduino)
- Please reload this page
- 4. Connecting EMIT to the Internet
- Please reload this page
- 4. Connecting EMIT to the Internet (Arduino)
- Please reload this page
- 5. Adding an accurate Timestamp with NTP
- Please reload this page
- 5. Adding an accurate Timestamp with NTP (Arduino)
- Please reload this page
- 6. Transmitting data over MQTT
- Please reload this page
- 6. Transmitting data over MQTT (Arduino)
- Please reload this page
- 7. Using the relay for control
- Please reload this page
- 7. Using the relay for control (Arduino)
- Please reload this page
- 8. Logging data to the microSD card
- Please reload this page
- 8. Logging data to the microSD card (Arduino)
- Please reload this page
- 9. Adding a web server to EMIT
- Please reload this page
- 9. Adding a web server to EMIT (Arduino)
- Please reload this page
- A Guided Tour Of EMIT's Features
- Please reload this page
- EMIT Case Modification
- Please reload this page
- EMIT Firmware Development Guide (Arduino)
- Please reload this page
- EMIT Firmware Development Guide (MicroPython)
- Please reload this page
- Measuring Temperature & Humidity
- Please reload this page
- Resources
- Please reload this page