Level 2 - Caverns

*Variations should be done later, start off with having at least one of each prop we need

Please see the concept art for level 2 on the moodboard!

• Wall Roots (at least 2) - Height of 3 Units, Length of 4 Units, Width of 2 Units (ideally the width is halfway in a wall)

  • Model
  • Texture

• Big ground roots (at least 2) - Height of 2, Length of 6, Width of 2 (ideally height is once again halfway in the floor)

  • Model
  • Texture

• Small crystal chunks (at least 3, small low poly) - Height of 1-2 Units, Length of 1-2 Units, Width of 1-2 Units (change up ratios for each one)

  • Model
  • Texture

• Large Crystal Clusters (at least 2) - Height of 4 Units, Length of 2 Units, Width of 2 Units

  • Model
  • Texture

• Mudstone Rocks (at least 2) - Height of 3 units, Length of 3 Units, Width of 2 Units (I imagine one being a big rock and the other being a pile of smaller rocks)

  • Model
  • Texture

• Slate Rocks (at least 2) - Height of 2.5 Units, Length of 3.5 Units, Width of 1.5 Units (Similar in size to the mudstone rocks, but a little more squished looking)

  • Model
  • Texture

• Cavern Ruins Entrance (frame and “door”) - Height of 10 Units, Length of 6 Units, Width of 2 Units (I imagine this one as a little taller and possibly thinner than the mineshaft entrance)

  • Model
  • Texture

• Ruin Pillars (variations are more ruined versions) - Height of 6 Units (Around 4 When ruined), Length of 2 Units, Width of 2 Units

  • Model
  • Texture

• Ruin Bricks (variations in size and destruction) - General rules: Height of around 2 Units, Length of around 2 Units, and Width of around 1-1.5 Units (Everything here can be changed by up to 1 Unit for variations and should generally be smaller if more ruined)

  • Model
  • Texture

• Rubble (at least 2) - Height of 4-6 Units, Length of 5 Units, Width of 6.5 Units (Smaller overall area than the Prison but with bigger chunks in them is what I envision)

  • Model
  • Texture

• Ruin Archway - Height of 6-8 Units, Length of 6 Units, Width of 2 Units

  • Model
  • Texture

• Ruin Archway rubble - (Just take chunks of the archway for this one)

  • Model
  • Texture

• Ruin Artistic Sculpture - Height of 6 Units, Length of 3 Units, Width of 3 Units

  • Model
  • Texture

• Ruin Heartroot (Landmark) - (This is all very rough guesswork as Level 2 has to go through a rework before this can go in) Height of 14 Units, Length of 8 Units, Width of 8 Units

  • Model
  • Texture

• Wooden boards (low poly) - Height of 6 Units, Length of 1-2 Units, Width of 0.5 Units (measurements done with planks standing straight up)

  • Model
  • Texture

• Mineshaft entranceways (frame and “door”) - Height of 9 Units, Length of 6-8 Units (unsure on this one), Width of 2 Units

  • Model
  • Texture

• Mineshaft Lantern - Height of 1.5 Units, Length of 0.5 Units, Width of 0.5 Units (same as the torch in level 1)

  • Model
  • Texture

• Mineshaft Crates (at least 2) Height of 2 Units, Length of 2 Units, Width of 2 Units

  • Model
  • Texture

• Minshaft Tools (pickaxe primarily, others lower priority) Pickaxe - Height of 2 Units, Length of 2 Units, Width of 0.5 Units (Presumably similar for other tools, this is taken with the tool standing on its hilt)

  • Model
  • Texture

• Mineshaft Support Pillar - Height of 9 Units, Length of 1-2 Units (top area should be 2, rest of pillar should be 1), Width of 1.5 Units

  • Model
  • Texture