Logistics - zymex22/Project-RimFactory-Revived GitHub Wiki
| Size | Health | Power | Research Prerequisites | Resource Cost | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
1x1 |
150HP |
50W |
PRF Eulers Identity |
|
A robotic arm built on a simple machine frame that can automatically fuel the building in front of it.
Works with "Refualable comp" buildings only
| Size | Health | Power | Research Prerequisites | Resource Cost | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
1x1 |
100HP |
Based on machine settings. (Variable) |
Automation Basics |
|
A Vacuum Hopper that take in any items on stockpiles within 5 tile range, even different stockpiles, as long their cells are in range. It can be setup to specific type and amount, and hold onto it until pulled away.
| Size | Health | Power | Research Prerequisites | Resource Cost | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
1.1x1.1 |
120HP |
60W |
AD Vrollers |
|
(PRF) A Puller That can pull stuff from growzones and place it into a storage or onto a belt.
| Size | Health | Power | Research Prerequisites | Resource Cost | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
1.1x1.1 |
120HP |
60W |
AD Vrollers |
|
(PRF) A Puller That Pull items from A to B more Flexible in in/output than IR Pusher/pullers, might be usefull in some cases
| Size | Health | Power | Research Prerequisites | Resource Cost | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
1.1x1.1 |
120HP |
60W |
AD Vrollers |
|
(PRF) A 90 degree angled Puller That push items from A to B more Flexible in in/output then IR Pusher/pullers, might be usefull in some cases, can swap left/right after placed.
| Size | Health | Power | Research Prerequisites | Resource Cost | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
1.1x1.1 |
120HP |
60W |
AD Vrollers |
|
(PRF) A Over wall item Puller That push items from A to B more Flexible in in/output then IR Pusher/pullers, might be usefull in some cases.
This one are placed over a wall so good for freezers or prisons where you dont want ppl through.
| Size | Health | Power | Research Prerequisites | Resource Cost | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
1x 1 |
80HP |
10W |
PRF Rollers |
|
Place it in the direction you want to carry. Place the item on top. (Item Puller and AutoMachineTool can be used.) The belt conveyors are connected by vertically adjoining the orientation.
| Size | Health | Power | Research Prerequisites | Resource Cost | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
1x1 |
80HP |
10W |
PRF Rollers |
|
Place it in the direction you want to carry.(In the wall) Place the item on top. (Item Puller and AutoMachineTool can be used.) The belt conveyors are connected by vertically adjoining the orientation.
| Size | Health | Power | Research Prerequisites | Resource Cost | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
1x1 |
80HP |
10W |
PRF Rollers |
|
Underground Belt Conveyor carries items in the basement. Underground BeltConveyor can not move items on the ground as it is. Connect to the underground conveyor entrance and exit and use.
| Size | Health | Power | Research Prerequisites | Resource Cost | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
1x1.1 |
80HP |
10W |
PRF Rollers |
|
Connect the ground belt conveyor and underground conveyor. It is the entrance to the underground conveyor.
| Size | Health | Power | Research Prerequisites | Resource Cost | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
1x1.1 |
80HP |
10W |
PRF Rollers |
|
Connect the ground belt conveyor and underground conveyor. It is an exit to the underground conveyor.