400W Burshless DC Spindle Motor Kit - zentoolworks/cnckits GitHub Wiki

Item Number	Item	Quantity
	#16	1
	Arcylic Board	1
	Spindle Holder (Top)	2
	Spindle Holder (Bottom)	2
	Control Box	1
	Brushless Spindle	1
	48V Power Supply	1
	M4 x 12	2
	M4 x 30	4
	M4 Nut	6
	M4 Washer	8
	M6 x 40	4
	M6 Nut	4
	10MM Wrench	1
	12MM Wrench	1

STEP 01

STEP 01: Prepare 1x #16, 1x Acrylic board, 4x M4x30, 8x M4 Nut, 4x M4 Washer for assembly. Place two washers on each of the four bolts.

STEP 02

STEP 02: Prepare 2x M4x12, 2x M4 Nut and Spindle Control. Tighten it up.

STEP 03

STEP 03: Wire up spindle control socket.

STEP 04

STEP 04: Wire up Power Supply.

STEP 05

STEP 05: Be sure to verify that the voltage selector switch located on the side of the spindle power supply is set to the 115v setting for the United States.

STEP 06

STEP 06: Prepare 4x M6x40 and 4x M6 Nut. Tighten up the spindle holder (top).

STEP 07

STEP 07: Assembled.

STEP 08

STEP 08: Completely Assembled.