ovpn2 nmcli connection add type ip-tunnel ip-tunnel.mode ipip con-name tun10 ifname tun10 remote 172.31.6.183 local 172.30.0.100 nmcli connection modify tun10 ipv4.addresses '10.0.0.1/30' nmcli connection modify tun10 ipv4.method manual nmcli connection modify tun10 +ipv4.routes "172.27.0.0/16 10.0.0.2" nmcli connection modify tun10 +ipv4.routes "172.28.0.0/16 10.0.0.2" nmcli connection up tun10

ov.hopto.org nmcli connection add type ip-tunnel ip-tunnel.mode ipip con-name tun10 ifname tun10 local 172.31.6.183 remote 172.30.0.100 nmcli connection modify tun10 ipv4.addresses '10.0.0.2/30' nmcli connection modify tun10 ipv4.method manual nmcli connection modify tun10 +ipv4.routes "172.30.1.0/24 10.0.0.1" nmcli connection up tun10

nmcli connection modify tun10 +ipv4.routes "10.150.0.0/16 10.0.0.1" nmcli connection modify tun10 +ipv4.routes "10.144.0.0/12 10.0.0.1" nmcli connection modify tun10 +ipv4.routes "10.128.0.0/12 10.0.0.1" nmcli connection modify tun10 +ipv4.routes "10.10.0.0/16 10.0.0.1"

ipa2 route add 172.16.0.0 255.240.0.0 gw 172.30.1.100

Chapter 16. Configuring IP tunnels

Chapter 16. Configuring IP tunnels

An introduction to Linux virtual interfaces: Tunnels

An introduction to Linux virtual interfaces: Tunnels

How to create VTI interface for IPsec Site-To-Site in OpenWrt?