ruckus - yar145/mytestrepo1 GitHub Wiki
Cloudpath Enrollment System PEAP With Onboard RADIUS Server Configuration Guide, 5.11
You can use PEAP authentication with the Cloudpath onboard RADIUS server. Only Active Directory (AD) authentication servers are supported with this PEAP implementation.
Advantages of using Cloudpath PEAP with AD include: It removes the requirement to deploy NPS as a RADIUS server in front of AD for 802.1X EAP-PEAP credential-based authentication. It provides a consolidated approach to migrating users from EAP-PEAP to EAP-TLS . With this type of authentication, you can set up any number of active directories to which your Cloudpath system can communicate. You then configure the Cloudpath onboard RADIUS server to support PEAP. You can also configure an unlimited number of policies, but only one policy will be assigned to a user, depending on which criteria that you specify matches a given user trying to connect to Cloudpath. For each policy, you assign a RADIUS attribute group that can contain many attributes including VLAN ID.
The basic steps to follow to use PEAP with the Cloudpath onboard RADIUS server are:
Set up your active directory servers. Creating An Authorization Server: This section covers the requirements to set up at least one authorization server. Adding an Active Directory Authentication Server: This section describes how to add a server to the PEAP configuration within the RADIUS Server portion of the Cloudpath UI. Adding Policies to RADIUS Server Configuration: This section describes how to add policies to the PEAP configuration within the RADIUS Server portion of the Cloudpath UI. Checking a User Record: This section shows you how to view information about users who have been enrolled or attempted to enroll into the Cloudpath system using this PEAP authentication process.
Cloudpath Enrollment System PEAP With an External RADIUS Server ŽnĮŐƵƌĂƟŽn Guide, 5.7
Cloudpath Enrollment System PEAP With Onboard RADIUS Server ŽnĮŐƵƌĂƟŽn Guide, 5.7
How to use external CA provided certificates for Wired 802.1x authentication with Cloudpath ES.
Employee With IT Asset Authenticated to AD Group
Employee With Personal Device Authenticated to AD Group
RKL
Ruckus SZ
RADIUS ACCOUNTING MESSAGES FROM RUCKUS NETWORKS MISSING DEVICE IP ADDRESS
config zone Demo wlan Dot1XDemo no eap-acct-ip-attr-ignore
from show: ... Authentication & Accounting Service
Authentication Service : ise
Use SCG as Proxy : Enabled
Accounting Service : ise
Use SCG as Proxy : Disabled
Send interim update : 5 minutes
Eap Acct Ip Attr Ignore : Disabled
Cloudpath
ssh cpn_service@cloudpathserver -p 8022
From the command-line configuration utility, enter the console command to access the Linux shell. From the Linux shell, enter the config command to access the command-line configuration utility.
console
Managing the New Wireless Network (IEEE 802.11) Policies Settings
Configure EAP profiles and settings in Windows
Configure EAP profiles and settings in Windows
netsh wlan show profiles | Shows all Wi-Fi profiles, including the profile name.
netsh wlan show profiles name="ProfileName" | Shows detailed information about a specific Wi-Fi profile
netsh wlan export profile name="ProfileName" folder="C:\Profiles" | Exports a Wi-Fi profile to the specified folder. The folder must exist.
netsh wlan add profile filename="C:\Profiles\ProfileName.xml" | Adds a Wi-Fi profile from the specified file.
netsh wlan delete profile name="ProfileName" | Deletes a Wi-Fi profile.