Xenon SM-PW702U

Property	Value
Manufacturer	Generic
Product page	Amazon Link
Wiki page
Build flag	XENON_SM_PW702U

Introduction

SM-PW702U is released under different brands.

Flashing

First, use a dremel to cut around the seam and expose the components.

Connect the leads. I used a piece of cardstock slipped under the board to help secure the leads. It is the same pin layout as KMC 70011.

Put GPIO0 to ground, then connect VCC. Disconnect GPIO and you can flash.

I flashed just fine with a raspberry pi. Took a few hours to get the pins lined up.

I will post pictures once I figure out how.

TODO

Issues

TODO