Tonbux PowerStrip02

Property	Value
Manufacturer	Tonbux
Product page	Amazon Link
Wiki page
Build flag	TONBUX_POWERSTRIP02

Introduction

Size: 7.8”x 3.9” x 1.1” Power Cord Length: 5ft Outlet Voltage: AC110-240V 10A Rated Power: 1250W USB Max Output: 2.1A Material: ABS Flame-Retardant Polycarbonate 4 AC Outlets + 4 USB Charging Ports (4 Outlets can be controlled individual, 4 USB ports are controlled as one) It seems it has support for HLW8012, but it's unpopulated.

Flashing

Notes

Flashing the board by hand cannot be performed easily with a RPi (50mA) or Bus Pirate's (150mA) onboard power supply. If you have a spare AdaFruit Huzzah or similar laying around, the AP2112 outputs a constant 600mA, which allows sufficient power to enable flashing of the chip. This will then require you to connect the GND of your programmer to the common GND provided by your power supply. Also connect the CS / GPIO0 to the GND to enable programming.

Issues

TODO