Test Design of hardware control commands regression - xcat2/xcat-core GitHub Wiki
Test Design of hardware control commands regression
Introduction
This document provides an overview of test of hardware control commands that is conducted on the IBM Witherspoon Physical Machine. This test plan is intended for the use of xCAT FVT team.
The test is against xCAT version 2.14. The build of xCAT will be picked up from the xcat.org
This test plan includes following test commands. These commands except for rflash should be tested in python version. rflash should be tested in perl.
1.rpower
2.rflash
3.rbeacon
4.rsetboot
5.rinv
6.rvitals
7.rspconfig
8.reventlog
Based on above commands. The test plans are following links.
rpower
Total cases number: 10. Automation cases: 10, manual cases:0
Test Design of rpower python version
rflash
Total cases number:47 Automation cases: 32 , Manual cases: 15
Test Design of rflash python version
rbeacon
Total cases number:10 Automation cases: 0 , Manual cases: 10
rsetboot
Total cases number:11 Automation cases: 11 , Manual cases: 0
rinv
Total cases number:14 Automation cases: 14 , Manual cases: 0
rvitals
Total cases number:11 Automation cases: 11 , Manual cases: 0
rspconfig
Total cases number:70 Automation cases: 25 , Manual cases: 45
reventlog
Total cases number: 19 Automation cases: 5 , Manual cases: 14