Rebasing our forks - wuhengzhi/crosswalk-website GitHub Wiki

As described in our Release Methodology page, Crosswalk follows a release process similar to Chromium's. Part of the release of Crosswalk it involves rebasing our forks of our downstream (Blink, Chromium,...) repositories on top of a certain upstream release.

This article shows how perform these rebases and what pitfalls to look out for, as well as how to update Crosswalk itself once the forks have been rebased.

Before you begin

Some skills are essential in order to rebase the code without losing half of your hair or running away in despair.

First of all, you must be familiar with Chromium's release process (which is what we have based our own relase methodology on). Particularly important things to know include:

  • ViewVC and how to use it.
  • Chromium's SVN repository organization: development happens in trunk (/trunk/src), trunk gets branched and branches have numbers (/branches/<NUMBER>/src), certain branches are chosen for releases (/releases/<RELEASE NUMBER>).
  • DEPS and DEPS.git are not updated in a branch after it is created from trunk.
  • DEPS in a release is updated. However, releases do not have a DEPS.git.
  • Analogously, Blink's development happens in trunk (/trunk) and a branch is created with the same number as the Chromium one when the latter is branched (/branches/chromium/<NUMBER>), except that Chromium branches such as 1234_55 do not have a corresponding branch in Blink; all commits to 1234, 1234_56, 1234_678 etc in Chromium go to the same branch 1234 in Blink.

You also need to be familiar with OmahaProxy. Understand which row you are supposed to choose and what the columns mean. If you are rebasing Crosswalk's dependencies for a new cycle (ie. you are working on what Crosswalk's master branch is going to be based on), you should check the linux-beta row in OmahaProxy. Likewise, if you are simply maintaining Crosswalk's stable branch and are thus updating from one Chromium release to another in the same milestone, use the linux-stable row.

As for columns, we are particularly interested in true branch and branch revision.

  • true branch is the branch number from which a certain release (row in the table) was cut.
  • branch revision is the actual SVN commit number in the true branch corresponding to a certain release (more than one release can come from the same branch, they just use different branch revisions).

Finally, spend some time getting to know git better. Do not follow the instructions below blindly. Specifically, make sure you know how references and refspecs work.

Branch names in blink-crosswalk and chromium-crosswalk

When creating new branches or updating existing ones, it is important to pay attention to Crosswalk's branch naming conventions for the forks. They apply to both blink-crosswalk and chromium-crosswalk.

The most basic distinction is between the master_* branches:

  • master, as usual in a git-based workflow, is the current development branch and the one everyone works on at the moment.
  • When rebasing to track a different release, the previous branch should be backed up and preserved as crosswalk-<version>/<release_number>. For example, crosswalk-1/28.0.1500.36 corresponds to all the commits we made to chromium-crosswalk (or blink-crosswalk) while we were tracking Chromium's 28.0.1500.36 release.

In other words, crosswalk-<version>/<release_number> simply contains a certain number of commits made by Crosswalk contributors on top of an upstream branch.

At least for now, we do not keep lkgr branches.

Rebasing blink-crosswalk

Let's start with the dependency deepest down the stack we have: Blink. Most of the time, rebasing Blink should be trivial: not only are fork-specific commits discouraged in general, but Blink normally serves Crosswalk's purposes just fine without requiring any changes from our part.

  1. Fork blink-crosswalk.

    In case this was not obvious, make sure you have your own fork of the blink-crosswalk both for experimenting and also for submitting pull requests and exercising the bots. Do NOT push your changes directly to crosswalk-project/blink-crosswalk.git directly without testing and talking to people first!

    Also, do not forget to add your remote to your checkout if you have not done so yet:

    cd third_party/WebKit
git remote add my-fork [email protected]:myusername/blink-crosswalk.git

  2. Back up the existing master branch.

    As mentioned above, since the master branch is going to have its history changed, it must be backed up into a history branch first. For example, if we are currently tracking Chromium release 28.0.1500.36, a branch called crosswalk-1/28.0.1500.36 must be created.

    git branch crosswalk-1/28.0.1500.36 master

  3. Determine the new Blink branch and revision that are going to be used.

    Let us assume we are working on Crosswalk's development branch (master). We look at the proper row (linux-beta) in OmahaProxy, and determine its version number is 30.0.1599.66. Moving right, we see that the true branch column shows the branch number is 1599_59. This means the Subversion branch in Blink's repository is branches/chromium/1599 (not 1599_59, as explained above), which can also be accessed with ViewVC.

    As mentioned above, the DEPS and DEPS.git files are not updated in the Subversion branches. You need to check the correct Subversion revision for Blink and Chromium in the release DEPS file (ie. /releases/31.0.1650.12/DEPS). In this file, we can see the following snippet:

    # ...
'src/third_party/WebKit':
  Var("webkit_trunk")[:-6] + '/branches/chromium/1650@158834',
# ...

    This means Blink needs to be at SVN revision 158834.

  4. Fetch the new Blink branch and create a new upstream branch.

    This use of git fetch is a bit unusual, and it assumes your origin remote points to a read-write checkout of blink-crosswalk, such as [email protected]:myusername/blink-crosswalk.git.

    git fetch https://chromium.googlesource.com/chromium/blink.git branch-heads/chromium/1599:refs/heads/upstream_30_0_1599_66

    A new local branch called upstream_30_0_1599_66 should now exist and be visible if you call git branch.

    As the same branch can be used for more than one release, the commit at the tip of the branch might not be the one corresponding to the release we want. Use git log or git svn find-rev to determine the SHA1 hash corresponding to the Subversion revision determined in the previous section (158213), and then reset to it:

    git checkout upstream_30_0_1599_66
git reset --hard <SHA1>

  5. Rebase existing fork-specific changes in master on top of the new upstream branch.

    1. In the trivial case, we have no fork-specific commits on top of the upstream ones (yay). This means both master (and master_history_28_0_1500_36) point to the same commit as upstream_28_0_1500_36). Updating master should be very simple: just make it point to the same change as the new upstream branch.
    git checkout master
git reset --hard upstream_30_0_1599_66

    1. If we do have commits on top of the upstream ones, we need to check which of them are still relevant and re-apply those which are.

      This process involves some manual work. Use git log and any other tools at your disposal to study the Crosswalk-specific commits we have. In some cases, their commit messages say "this commit will not be needed once we rebase", or "this commit is only necessary until release XX.YY". Take note of them, because they will probably not be needed anymore. After that, use git rebase -i to rebase our commits on top of the new branch. It will try to add a lot of previous Chromium commits as well, so you need to remove a handful of lines (anything before the first Crosswalk-specific commit belongs to the previous Chromium branch and must be removed) and check which commits should actually be added.

      Note that there some manual effort is required here: there are likely going to be a lot of conflicts, so you need to check the commits, remove some and adjust some others. Also note that the automatic merge commits from GitHub will be lost.

      git checkout master
git rebase -i upstream_30_0_1599_66 # Choose the right commits, resolve conflicts.

  6. Push your new branches to your fork.

    Your new commits will have to be tested with Crosswalk (and Chromium) later, so you need to push them to your fork first.

    git push my-fork crosswalk-1/28.0.1500.36
git push -f my-fork master

Rebasing chromium-crosswalk

The rebasing process for chromium-crosswalk is very similar to the one for blink-crosswalk. The differences are in some branch names upstream and in the fact that it is much more likely that we have commits on top of the upstream ones than for blink-crosswalk.

The parts of the process that are similar to blink-crosswalk have shorter descriptions here. Please refer to the blink-crosswalk section for more detailed explanations of each step. It's not possible to emphasize enough how important it is not to follow the steps blindly, so read up and understand what is going on first.

  1. Fork chromium-crosswalk.

    Once again, fork the repository if you haven't done it yet, and DO NOT push your changes directly to crosswalk-project/chromium-crosswalk.git directly without testing and talking to people first!

    And, if you haven't done so, add your remote to your checkout:

    git remote add my-fork [email protected]:myusername/chromium-crosswalk.git

  2. Back up the existing master branch.

    Assuming we are currently tracking Chromium release 28.0.1500.36:

    git branch crosswalk-1/28.0.1500.36 master

  3. Determine the new Chromium branch and revision that are going to be used.

    Assuming we are tracking linux-beta and it is now at release 30.0.1599.66: the true branch column in OmahaProxy says the branch number is 1599_59, so the Subversion branch in Chromium's repository is branches/1599_66.

    Contrary to Blink, there is no need to check the DEPS file in the release branch; if you still want to, the 'src' section in releases/30.0.1599.66/DEPS should point to the same revision as true branch in OmahaProxy, 226662:

    # ...
'src':
  '/branches/1650/src@226662',
# ...

  4. Fetch the new Chromium branch and create a new upstream branch.

    git fetch https://chromium.googlesource.com/chromium/src.git branch-heads/1599:refs/heads/upstream_30_0_1599_66

    Verify the new branch upstream_30_0_1599_66 has been created by running git branch.

    As the same branch can be used for more than one release, the commit at the tip of the branch might not be the one corresponding to the release we want. Use git log or git svn find-rev to determine the SHA1 hash corresponding to the Subversion revision determined in the previous section (226662), and then reset to it:

    git checkout upstream_30_0_1599_66
git reset --hard <SHA1>

  5. Rebase existing fork-specific changes in master on top of the new upstream branch.

    1. In the trivial case (ie. we have no commits on top of upstream):
    git checkout master
git reset --hard upstream_30_0_1599_66
    1. If we do have commits of our own, use git log to check if some of the commit messages say certain commits can be safely removed when moving to a newer Chromium release, then rebase:
    git checkout master
git rebase -i upstream_30_0_1599_66 # Choose the right commits, resolve conflicts.

  6. Push your new branches to your fork.

    git push my-fork crosswalk-1/28.0.1500.36
git push -f my-fork master

Updating Crosswalk itself

Now that the forks themselves have been updated, we need to work on the Crosswalk part of the rebase. It can be divided in two parts: first, smoke-test your fork changes by building content shell, then update Crosswalk's code since some of the Chromium (and maybe V8) features it uses have changed (this is very much likely if you are tracking a new milestone, whereas stable updated should be fairly painless in this regard).

  1. Update version numbers in Crosswalk.

    Quick recap: Crosswalk follows a MAJOR.MINOR.BUILD.PATCH versioning scheme. See our Release Methodology page for an explanation of each of those numbers.

    For development branch rebases, we need to bump the MAJOR and MINOR numbers: MAJOR needs to be increased by 1, while MINOR is the major number of the new Chromium release we are going to track. For example, if Crosswalk's current version is 1.28.52.3 and we are now tracking Chromium 30.0.1599.66, the new Crosswalk version number should be 2.30.0.0.

    For new releases in the stabilization branch, only the PATCH number is updated, as we are always tracking the same Chromium milestone. For example, if Crosswalk's current version is 1.28.52.3 and we are updating our Chromium from 28.0.1500.36 to 28.0.1500.72, the new version will be 1.28.52.4.

    These version numbers need to be updated in the following files:

    • VERSION
    • packaging/crosswalk.spec

  2. Update DEPS.xwalk.

    This should not require many explanations: it is the file used to generate .gclient-xwalk and determines where we fetch Blink and Chromium from and at what revision.

    First of all, check if there are entries there that could be removed (for example, there could be an entry saying "Delete the dependency below once we track Chromium >M30"), and remove them.

    After that, update chromium_version, chromium_crosswalk_point and blink_crosswalk_pint to the new upstream Chromium version, the new chromium-crosswalk SHA1 hash and the new blink-crosswalk SHA1 hash, respectively.

    Last, update the blink-crosswalk and chromium-crosswalk lines in the deps_xwalk dictionary to point to your fork, since you have not pushed your new branches and changes to crosswalk-project's repositories yet. Doing so is also useful to let others fetch the changes from your fork and help updating Crosswalk's code if necessary.

  3. Smoke-test the fork updates.

    The first way to verify your rebases went well and nothing is broken is to build Chromium's content shell. You should already be familiar with content shell, so let's go directly to the commands:

    gclient sync -v
# gclient should now checkout a new 30.0.1599.66 directory and
# then fetch new versions of a lot of third-party dependencies.

cd /path/to/chromium-crosswalk
python build/gyp_chromium
ninja -C out/Debug content_shell

    There is nothing too special above, you just need to tell gclient to fetch the new dependencies, build content shell and then run it to verify everything is working. The exact way you build the content_shell target (with ninja or with make etc) is irrelevant. Building in debug mode is recommended in order to build assertions and other parts of the code ignored in a release build.

  4. Try building Crosswalk and its tests.

    Once you are sure content shell is OK, it is time to verify Crosswalk itself. Start by trying to build xwalk and its tests, then running them.

    cd /path/to/chromium-crosswalk
python xwalk/gyp_xwalk # Optional arguments etc etc.
ninja -C out/Debug xwalk
ninja -C out/Debug xwalk_unittest
ninja -C out/Debug xwalk_browsertest
./out/Debug/xwalk_unittest
./out/Debug/xwalk_browsertest

    Again, the exact command line arguments are not described above, and can be found in other pages. The important part is that you must build Crosswalk and test it. Try doing that with as many platforms as you can, such as Android and Tizen as well.

    If you are working on a stable branch, the whole process should not have unexpected bumps.

    On the other hand, if this is a rebase on top of a new Chromium milestone for Crosswalk's development branch, it is very likely that Crosswalk will fail to build. This is the time to start adapting Crosswalk's source code to the changes in Chromium itself. You can also git commit your current changes, push them to a branch in your Crosswalk fork and ask for more people to chime in and help, as Chromium's code can change a lot between releases at times.

    Rinse and repeat until everything builds, all tests pass and Crosswalk seems to be working.

For development rebases: update the QA infrastructure

This is an annoying step that we are trying to get rid of. It is required only for Crosswalk's development branch because the build/try bots do not build the stable branch at the moment.

By now it should be fairly clear that the rebases have been done correctly and Crosswalk is also working as expected, but if you are rebasing to track a different Chromium milestone (ie. you are working on Crosswalk's development branch) the QA infrastructure needs to be updated as well.

First, the build and try bot masters need to be shut down before you push your blink-crosswalk and chromium-crosswalk changes to the crosswalk-project repositories, otherwise there is a risk that the bots will try to build each new commit individually. You need to either ask people who have access to the build/try bots infrastructure (such as Shiliu Wang, Halton Huo, Raphael Kubo da Costa and Alexis Menard) or get access to the necessary infrastructure and do it yourself.

Once that is done, push your new branches:

# Assuming origin points to [email protected]:crosswalk-project/{blink,chromium}-crosswalk.git
cd /path/to/chromium-crosswalk/third_party/WebKit
git push -f origin master

cd /path/to/chromium-crosswalk
git push -f origin master

Next, clone the private build-infrastructure.git repository or ask someone to update XWALK_CHROMIUM_VERSION in masters/master.tryserver.wrt/master.cfg and masters/master.wrt/master.cfg there.

After that, restart the build and try bot masters. If the new commits to blink-crosswalk and chromium-crosswalk are not picked up automatically by the build bots, force-build the content bots.

Push your changes

Once everything is working, you can push your blink-crosswalk and chromium-crosswalk changes to crosswalk-project if you haven't done so yet.

# Assuming origin points to [email protected]:crosswalk-project/{blink,chromium}-crosswalk.git
cd /path/to/chromium-crosswalk/third_party/WebKit
git push origin crosswalk-1/28.0.1500.36
git push -f origin next

cd /path/to/chromium-crosswalk
git push origin crosswalk-1/28.0.1500.36
git push -f origin next

This should not break anything for Crosswalk users, as the SHA1 hashes referenced in the Crosswalk repository are still present in the forks.

Finally, create a single commit in Crosswalk that updates version numbers, adjusts the code and changes DEPS.xwalk and send a pull request. Don't forget to update DEPS.xwalk so it tracks the correct blink-crosswalk and chromium-crosswalk ([email protected]:crosswalk-project/{blink,chromium}-crosswalk.git) back again.

After you pushed to the next branch you can call for help and patches that couldn't be rebase trivially.

When the quality of next is acceptable you can merge it back into master.

# Assuming origin points to [email protected]:crosswalk-project/{blink,chromium}-crosswalk.git and you are in next branch
cd /path/to/chromium-crosswalk/third_party/WebKit
git push -f origin next

cd /path/to/chromium-crosswalk
git push -f origin next

The try bots will then test it and, if everything goes well, Crosswalk will be updated for everyone to enjoy.

Add a custom footer
⚠️ **GitHub.com Fallback** ⚠️