Lane Arrangement - woven-planet/opensafety-mbse GitHub Wiki

A Lane Configuration Segment marks off a set of adjacent Driving Lanes in the same Conduit that do not experience any reconfigurations such as a Merge, Split, etc. So all the Driving Lanes within any given Lane Configuration Segment run along nicely next to each other without intruding into one another or splitting off or initiating or terminating. Each such Driving Lane component within a Lane Configuration Segment is called a “Lane Arrangement”.

images/road-subsystem/road-lane-arrangement-10.png

And each Lane Arrangement can be identified by either its inner or outer Lane Division since any given Lane Division pairs only with its counterpart on the other side of its Lane. You can’t do this with the Driving Lane itself since, over the course of a Road Segment the same Lane Division might alternate the opposing Lane Division it pairs with.

Identifiers

  1. Inside division + LCS + Road segment
  2. Outside division + LCS + Road segment
  3. Inside division + LCS + Conduit + Road segment

Identifier 3 is a super identifier for the purpose of ensuring that R29 puts a Driving Lane in a Lane Arrangement sharing the same Conduit.

Attributes

(No non referential attributes)