Features to Improve - williamgardner2017/Hampod_Program GitHub Wiki

• Introduction

Features to Improve

Hardware

Software

• The ports to choose during the startup process could be revamped. Currently, there exist three USB ports and one RS232 Serial Port. However, the current ports during startup are:
  • The 3-pin Serial on the PCB as S0,
  • The Serial Port on the back as S1,
  • The USB port attached to the NanoPi Neo as USB0,
  • One of the USB ports on the PCB as USB1 (did not test it in time).

Other

• The manual installation process in documentation could be cleaned up a bit. It covers a majority of the process, however there might be small issues in steps in places.