20 other software and utilities - wildekek/rdtech-firmware-unisoft GitHub Wiki

Other Software and Utilities

75 19.4. If you want to change the AP, or if WiFi no longer works at all, and you want to start all over. ● Start the RD60xx ● On the startup screen, when it shows the IP address, press “◄” ● RESET will highlight ● Press “ENTER” ● You can now start the WiFi configuration all over. 20. Other Software and Utilities 20.1. ScreenDumper Utility UniSoft’s ‘Screen Dumper’ for Windows, Latest Version The ScreenDumper utility is connected to your computer in the same way as the RDFlasher utility. Once connected, you can capture the RD60xx’s Display and save it as an image file. (Note: This image is from a pre-release of RDScreenDumper v1.3 - v1.6 is the latest released version)

Figure

76 CAUTION!!!! This utility requires approximately 2 seconds to receive a screen capture from the RD60xx unit at a baud rate of 115200, (Longer for slower speeds,) completely locking the firmware for the duration. Earlier versions for the tool required significantly more time, so it is advised to use the latest version. During this time the RD60xx WILL NOT engage any safety Protection.

77 20.2. How to Change the Boot Logo Image TODO: Re-Write instructions from original (bad english Riden manual) for changing Boot Logo Image}