Disclaimer

5 2. Document Status This document was originally created in February 2021. The most recent beta firmware at the time of this document is version 1k, and also works for the newer hardware versions that have a different LCD (ST7789). RD6006: RD60062_V1.41.1k.bin RD6006P: RD60065_V1.43.1k.bin RD6012: RD60121_V1.36.1k.bin RD6018: RD60181_V1.38.1k.bin All released on 9 June 2023. Each firmware will also work on the corresponding “W” variants (e.g. RD60xxW), having a WiFi daughter board for remote control and monitoring. Please Note: You MUST install the correct firmware for your particular RD60xx Model, Otherwise unexpected behavior can & will occur. 3. Disclaimer While we have made every attempt to ensure that the information contained in this document is correct, The Document Authors, Contributors, and Firmware Author are not responsible for any error or omissions, or for the results obtained from the use of this information. All information in this document is provided “as is”, with no guarantee of completeness, accuracy, usefulness, timeliness or the results obtained from the use of this information, and without any warranties of any kind whatsoever, express or implied, including, but not limited to performance and fitness for a particular purpose. Any actions you take upon the information in this document are strictly at your own risk. In no event will the Document Authors, Contributors, or Firmware Author be liable to you or anyone else for any decision made or action taken in reliance on the information within this document, or for any consequential, special or similar damages, even if advised of the possibility of such damages. We will not be liable for any losses or damages in connection with the use of this document or the Firmware it references.