Setting Interface IP Addresses - wAlber47/Tech-Journal GitHub Wiki

For WAN:

  1. Do Not use DHCP.
  2. Enter 10.0.17.167 when asked for address.
  3. Using 24-bit subnet mask.
  4. Upstream gateway is 10.0.17.2.
  5. Use the gateway as your IPv4 name server as well.
  6. Bypass IPv6 Configuration.
  7. Do not use HTTP for the GUI.

For LAN:

  1. Do not use DHCP
  2. Enter 10.0.5.2 when asked for address.
  3. Using 24-bit subnet mask.
  4. You do not have an upstream LAN gateway, (we are the gateway).
  5. Bypass IPv6 Configuration
  6. Do not enable a LAN DHCP Server
  7. Do not revert to HTTP