ccgx boot log - victronenergy/venus GitHub Wiki

v1.24

0.000 0.000: 0.004 0.004: U-Boot SPL 2013.01.01 (Jun 22 2015 - 12:02:03)
2.147 2.143: [    0.000000] Booting Linux on physical CPU 0
2.158 0.011: [    0.000000] Linux version 3.7.1 (jeroen@black) (gcc version 4.7.2 (GCC) ) #1 Mon Jun 22 01:18:09 CEST 2015
2.165 0.007: [    0.000000] CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c53c7d
2.173 0.008: [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
2.177 0.004: [    0.000000] Machine: Victron BPP3
2.182 0.005: [    0.000000] Reserving 2097152 bytes SDRAM for VRAM
2.188 0.006: [    0.000000] Memory policy: ECC disabled, Data cache writeback
2.192 0.004: [    0.000000] AM3517 ES1.1 (l2cache sgx neon )
2.199 0.007: [    0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
2.207 0.008: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64256
2.239 0.032: [    0.000000] Kernel command line: root=ubi0:rootfs rootfstype=ubifs ubi.mtd=9 ip=10.0.0.200:10.0.0.103:::ccgx::off console=ttyO0,115200 mtdparts=omap2-nand.0:512k(MLO),1m(u-boot),256k(env1),256k(env2),1m(u-boot2),256k(bootparms),768k(splash),6m(kernel),200m(data),-(rootfs) omapdss.def_disp=lcd omapfb.vram=0:2M vram=2M fbskip ethaddr=84:7e:40:64:92:f1
2.246 0.007: [    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
2.253 0.007: [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
2.260 0.007: [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
2.264 0.004: [    0.000000] Memory: 253MB = 253MB total
2.271 0.007: [    0.000000] Memory: 246120k/246120k available, 16024k reserved, 0K highmem
2.276 0.005: [    0.000000] Virtual kernel memory layout:
2.282 0.006: [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
2.288 0.006: [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
2.294 0.006: [    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
2.300 0.006: [    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
2.306 0.006: [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
2.312 0.006: [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
2.318 0.006: [    0.000000]       .text : 0xc0008000 - 0xc04de2cc   (4953 kB)
2.324 0.006: [    0.000000]       .init : 0xc04df000 - 0xc050b9c8   ( 179 kB)
2.330 0.006: [    0.000000]       .data : 0xc050c000 - 0xc054f2e0   ( 269 kB)
2.336 0.006: [    0.000000]        .bss : 0xc054f304 - 0xc0a65e2c   (5211 kB)
2.339 0.003: [    0.000000] NR_IRQS:16 nr_irqs:16 16
2.347 0.008: [    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
2.353 0.006: [    0.000000] Total of 96 interrupts on 1 active controller
2.358 0.005: [    0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
2.367 0.009: [    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
2.372 0.005: [    0.000000] OMAP clocksource: 32k_counter at 32768 Hz
2.376 0.004: [    0.000000] Console: colour dummy device 80x30
2.385 0.009: [    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
2.389 0.004: [    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
2.393 0.004: [    0.000000] ... MAX_LOCK_DEPTH:          48
2.398 0.005: [    0.000000] ... MAX_LOCKDEP_KEYS:        8191
2.402 0.004: [    0.000000] ... CLASSHASH_SIZE:          4096
2.407 0.005: [    0.000000] ... MAX_LOCKDEP_ENTRIES:     16384
2.412 0.005: [    0.000000] ... MAX_LOCKDEP_CHAINS:      32768
2.416 0.004: [    0.000000] ... CHAINHASH_SIZE:          16384
2.422 0.006: [    0.000000]  memory used by lock dependency info: 3695 kB
2.428 0.006: [    0.000000]  per task-struct memory footprint: 1152 bytes
2.434 0.006: [    0.000854] Calibrating delay loop... 397.57 BogoMIPS (lpj=1554432)
2.439 0.005: [    0.109344] pid_max: default: 32768 minimum: 301
2.444 0.005: [    0.109802] Mount-cache hash table entries: 512
2.449 0.005: [    0.113861] CPU: Testing write buffer coherency: ok
2.456 0.007: [    0.114868] Setting up static identity map for 0x80395b30 - 0x80395b88
2.461 0.005: [    0.179077] pinctrl core: initialized pinctrl subsystem
2.466 0.005: [    0.184844] regulator-dummy: no parameters
2.470 0.004: [    0.186614] NET: Registered protocol family 16
2.478 0.008: [    0.188201] DMA: preallocated 256 KiB pool for atomic coherent allocations
2.483 0.005: [    0.190093] omap-gpmc omap-gpmc: GPMC revision 5.0
2.487 0.004: [    0.200469] OMAP GPIO hardware version 2.5
2.493 0.006: [    0.216430] omap_mux_init: Add partition: #1: core, flags: 0
2.496 0.003: [    0.239532] Found NAND on CS0
2.500 0.004: [    0.239562] Registering NAND on CS0
2.506 0.006: [    0.241577] _omap_mux_init_gpio: Multiple gpio paths (3) for gpio126
2.513 0.007: [    0.243804] _omap_mux_init_gpio: Multiple gpio paths (2) for gpio99
2.520 0.007: [    0.243835] _omap_mux_init_gpio: Multiple gpio paths (2) for gpio104
2.526 0.006: [    0.247924] hw-breakpoint: debug architecture 0x4 unsupported.
2.531 0.004: [    0.257629] OMAP DMA hardware revision 4.0
2.536 0.005: [    0.261810]  arm-pmu: alias fck already exists
2.540 0.004: [    0.307495] bio: create slab  at 0
2.545 0.006: [    0.387542] omap-dma-engine omap-dma-engine: OMAP DMA engine driver
2.549 0.004: [    0.388641] display: 1800 mV normal 
2.553 0.004: [    0.392395] SCSI subsystem initialized
2.560 0.006: [    0.394714] usbcore: registered new interface driver usbfs
2.565 0.005: [    0.395263] usbcore: registered new interface driver hub
2.571 0.006: [    0.395874] usbcore: registered new device driver usb
2.574 0.003: [    0.404083] VDCDC1: 1200 mV normal 
2.577 0.004: [    0.405456] VDCDC2: 3300 mV normal 
2.581 0.004: [    0.406616] VDCDC3: 1800 mV normal 
2.584 0.003: [    0.407470] LDO1: 1800 mV normal 
2.589 0.004: [    0.408569] LDO2: 3300 mV normal 
2.595 0.006: [    0.410125] omap_i2c omap_i2c.1: bus 1 rev1.3.12 at 400 kHz
2.600 0.005: [    0.412200] omap_i2c omap_i2c.3: bus 3 rev1.3.12 at 400 kHz
2.605 0.005: [    0.420959] Switching to clocksource 32k_counter
2.609 0.005: [    0.470520] NET: Registered protocol family 2
2.616 0.007: [    0.472534] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
2.624 0.007: [    0.472991] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
2.631 0.007: [    0.477600] TCP: Hash tables configured (established 8192 bind 8192)
2.634 0.003: [    0.477844] TCP: reno registered
2.639 0.006: [    0.477905] UDP hash table entries: 256 (order: 2, 20480 bytes)
2.646 0.007: [    0.478210] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
2.652 0.005: [    0.479095] NET: Registered protocol family 1
2.659 0.007: [    0.479583] usbhs_omap usbhs_omap: xclk60mhsp1_ck set parentfailed error:-22
2.663 0.004: [    0.483795] CPU PMU: probing PMU on CPU 0
2.672 0.009: [    0.483947] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
2.676 0.004: [    0.496734] msgmni has been set to 480
2.679 0.004: [    0.501373] io scheduler noop registered
2.683 0.004: [    0.501403] io scheduler deadline registered
2.689 0.005: [    0.501464] io scheduler cfq registered (default)
2.692 0.003: [    0.503875] OMAP DSS rev 2.0
2.699 0.007: [    0.513671] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
2.706 0.007: [    0.520050] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 88) is a OMAP UART0
2.710 0.004: [    1.083099] console [ttyO0] enabled
2.719 0.009: [    1.088684] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 89) is a OMAP UART1
2.728 0.009: [    1.097412] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 90) is a OMAP UART2
2.736 0.008: [    1.108978] brd: module loaded
2.754 0.018: [    1.127136] loop: module loaded
2.761 0.007: [    1.130584] at24 1-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write
2.772 0.011: [    1.141632] mtdoops: mtd device (mtddev=name/number) must be supplied
2.778 0.006: [    1.148529] Generic platform RAM MTD, (c) 2004 Simtec Electronics
2.791 0.013: [    1.156219] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAND 512MiB 1,8V 16-bit), page size: 2048, OOB size: 64
2.798 0.007: [    1.168243] 10 cmdlinepart partitions found on MTD device omap2-nand.0
2.804 0.006: [    1.175109] Creating 10 MTD partitions on "omap2-nand.0":
2.809 0.005: [    1.180847] 0x000000000000-0x000000080000 : "MLO"
2.821 0.012: [    1.192108] 0x000000080000-0x000000180000 : "u-boot"
2.830 0.009: [    1.201873] 0x000000180000-0x0000001c0000 : "env1"
2.839 0.009: [    1.210876] 0x0000001c0000-0x000000200000 : "env2"
2.848 0.009: [    1.219757] 0x000000200000-0x000000300000 : "u-boot2"
2.858 0.010: [    1.229583] 0x000000300000-0x000000340000 : "bootparms"
2.868 0.010: [    1.239196] 0x000000340000-0x000000400000 : "splash"
2.877 0.009: [    1.248657] 0x000000400000-0x000000a00000 : "kernel"
2.891 0.014: [    1.262573] 0x000000a00000-0x00000d200000 : "data"
3.071 0.180: [    1.442657] 0x00000d200000-0x000020000000 : "rootfs"
3.338 0.267: [    1.710968] OneNAND driver initializing
3.344 0.006: [    1.715606] tun: Universal TUN/TAP device driver, 1.6
3.350 0.006: [    1.720977] tun: (C) 1999-2004 Max Krasnyansky 
3.355 0.005: [    1.728271] CAN device driver interface
3.366 0.011: [    1.735351] ti_hecc ti_hecc: device registered (reg_base=d0810000, irq=40)
3.418 0.052: [    1.788452] davinci_mdio davinci_mdio.0: davinci mdio revision 1.5
3.424 0.006: [    1.794952] davinci_mdio davinci_mdio.0: detected phy mask fffffffe
3.431 0.007: [    1.803802] libphy: davinci_mdio.0: probed
3.440 0.009: [    1.808197] davinci_mdio davinci_mdio.0: phy[0]: device davinci_mdio-0:00, driver unknown
3.448 0.008: [    1.818664] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
3.456 0.008: [    1.825836] ehci-omap.0 supply hsusb0 not found, using dummy regulator
3.462 0.006: [    1.833160] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
3.472 0.010: [    1.841461] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
4.511 1.039: [    2.882232] ehci-omap ehci-omap.0: irq 93, io mem 0x48064800
4.527 0.016: [    2.897827] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
4.535 0.008: [    2.904632] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
4.543 0.008: [    2.911804] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
4.548 0.005: [    2.919433] usb usb1: Product: OMAP-EHCI Host Controller
4.554 0.006: [    2.925018] usb usb1: Manufacturer: Linux 3.7.1 ehci_hcd
4.559 0.005: [    2.930633] usb usb1: SerialNumber: ehci-omap.0
4.566 0.007: [    2.939147] hub 1-0:1.0: USB hub found
4.571 0.005: [    2.943267] hub 1-0:1.0: 3 ports detected
4.580 0.009: [    2.950683] usbcore: registered new interface driver usbtmc
4.585 0.005: [    2.956604] Initializing USB Mass Storage driver...
4.592 0.007: [    2.962402] usbcore: registered new interface driver usb-storage
4.597 0.005: [    2.968749] USB Mass Storage support registered.
4.607 0.010: [    2.974273] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
4.612 0.005: [    2.983795] 6Waiting for PHY clock good...
4.637 0.025: [    3.007751] rtc-ds1307 3-0068: rtc core: registered ds1307 as rtc0
4.642 0.005: [    3.014282] rtc-ds1307 3-0068: 56 bytes nvram
4.646 0.004: [    3.019470] i2c /dev entries driver
4.658 0.012: [    3.027587] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
4.665 0.007: [    3.035675] cpu0 supply vcc not found, using dummy regulator
4.672 0.007: [    3.041778] omap_cpufreq_init: physical regulator not present for MPU
4.678 0.006: [    3.050048] cpuidle: using governor ladder
4.682 0.004: [    3.054443] cpuidle: using governor menu
4.690 0.008: [    3.060668] omap_hsmmc omap_hsmmc.0: Failed to get debounce clk
4.697 0.007: [    3.067077] omap-dma-engine omap-dma-engine: allocating channel for 62
4.704 0.007: [    3.074035] omap-dma-engine omap-dma-engine: allocating channel for 61
4.758 0.054: [    3.128662] usbcore: registered new interface driver usbhid
4.762 0.004: [    3.134613] usbhid: USB HID core driver
4.766 0.004: [    3.139434] TCP: cubic registered
4.771 0.005: [    3.143005] Initializing XFRM netlink socket
4.776 0.005: [    3.147888] NET: Registered protocol family 10
4.783 0.007: [    3.155029] sit: IPv6 over IPv4 tunneling driver
4.792 0.009: [    3.164276] NET: Registered protocol family 17
4.797 0.005: [    3.169067] NET: Registered protocol family 15
4.803 0.006: [    3.173797] can: controller area network core (rev 20120528 abi 9)
4.808 0.005: [    3.180511] NET: Registered protocol family 29
4.813 0.005: [    3.185241] can: raw protocol (rev 20120528)
4.819 0.006: [    3.189880] lib80211: common routines for IEEE802.11 drivers
4.825 0.006: [    3.197418] Key type dns_resolver registered
4.833 0.008: [    3.202056] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
4.839 0.006: [    3.211334] pwm: omap_dm_timer_request_specific
4.843 0.004: [    3.216217] pwm: omap_dm_timer_set_pwm
4.853 0.010: [    3.222625] voltdm_scale: No voltage scale API registered for vdd_mpu_iva
4.860 0.007: [    3.230346] voltdm_scale: No voltage scale API registered for vdd_core
4.879 0.019: [    3.251190] LDO2: incomplete constraints, leaving on
4.885 0.006: [    3.256988] LDO1: incomplete constraints, leaving on
4.892 0.007: [    3.264465] UBI: attaching mtd9 to ubi0
4.927 0.035: [    3.296569] usb 1-1: new high-speed USB device number 2 using ehci-omap
5.092 0.165: [    3.461944] usb 1-1: New USB device found, idVendor=0424, idProduct=2412
5.099 0.007: [    3.469024] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
5.127 0.028: [    3.500518] hub 1-1:1.0: USB hub found
5.132 0.005: [    3.504669] hub 1-1:1.0: 2 ports detected
5.675 0.543: [    4.048217] UBI: scanning is finished
5.700 0.025: [    4.070922] UBI: attached mtd9 (name "rootfs", size 302 MiB) to ubi0
5.707 0.007: [    4.077667] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
5.714 0.007: [    4.084777] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 512
5.721 0.007: [    4.091766] UBI: VID header offset: 512 (aligned 512), data offset: 2048
5.728 0.007: [    4.098815] UBI: good PEBs: 2416, bad PEBs: 0, corrupted PEBs: 0
5.736 0.007: [    4.105133] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
5.745 0.010: [    4.112640] UBI: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 701906723
5.755 0.009: [    4.122100] UBI: available PEBs: 0, total reserved PEBs: 2416, PEBs reserved for bad PEB handling: 80
5.763 0.008: [    4.133666] UBI: background thread "ubi_bgt0d" started, PID 642
5.775 0.013: [    4.145294] input: gpio-keys as /devices/platform/gpio-keys/input/input0
5.788 0.012: [    4.156219] rtc-ds1307 3-0068: setting system clock to 2015-06-24 20:07:15 UTC (1435176435)
5.820 0.032: [    4.189758] UBIFS: background thread "ubifs_bgt0_0" started, PID 650
5.840 0.021: [    4.213653] UBIFS: recovery needed
6.045 0.204: [    4.417694] UBIFS: recovery completed
6.052 0.007: [    4.421630] UBIFS: mounted UBI device 0, volume 0, name "rootfs"(null)
6.061 0.009: [    4.428527] UBIFS: LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
6.072 0.011: [    4.438140] UBIFS: FS size: 299464704 bytes (285 MiB, 2321 LEBs), journal size 9033728 bytes (8 MiB, 71 LEBs)
6.077 0.005: [    4.448577] UBIFS: reserved for root: 0 bytes (0 KiB)
6.088 0.011: [    4.453918] UBIFS: media format: w4/r0 (latest is w4/r0), UUID CE840275-6B7E-418A-BF2A-0001D4639D34, small LPT model
6.096 0.008: [    4.466827] VFS: Mounted root (ubifs filesystem) on device 0:10.
6.101 0.005: [    4.473785] Freeing init memory: 176K
INIT: version 2.88 booting
6.548 0.323: Starting udev
11.587 5.039: Starting Bootlog daemon: bootlogd.
11.598 0.011: Mounting local filesystems...
11.617 0.019: Remounting rw...
12.278 0.661: [   10.651153] UBI: attaching mtd8 to ubi1
12.775 0.496: [   11.147644] UBI: scanning is finished
12.803 0.028: [   11.172912] UBI: attached mtd8 (name "data", size 200 MiB) to ubi1
12.810 0.007: [   11.179504] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
12.817 0.007: [   11.186614] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 512
12.824 0.007: [   11.193572] UBI: VID header offset: 512 (aligned 512), data offset: 2048
12.830 0.006: [   11.200653] UBI: good PEBs: 1600, bad PEBs: 0, corrupted PEBs: 0
12.838 0.008: [   11.206970] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
12.847 0.009: [   11.214508] UBI: max/mean erase counter: 23/12, WL threshold: 4096, image sequence number: 804580323
12.857 0.010: [   11.224090] UBI: available PEBs: 0, total reserved PEBs: 1600, PEBs reserved for bad PEB handling: 80
12.863 0.006: [   11.233825] UBI: background thread "ubi_bgt1d" started, PID 1012
12.883 0.020: UBI device number 1, total 1600 LEBs (206438400 bytes, 196.9 MiB), available 0 LEBs (0 bytes), LEB size 129024 bytes (126.0 KiB)
12.913 0.030: [   11.282684] UBIFS: background thread "ubifs_bgt1_0" started, PID 1014
12.934 0.021: [   11.306732] UBIFS: recovery needed
13.265 0.331: [   11.637695] UBIFS: recovery completed
13.271 0.006: [   11.641632] UBIFS: mounted UBI device 1, volume 0, name "data"(null)
13.281 0.010: [   11.648345] UBIFS: LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
13.291 0.010: [   11.657958] UBIFS: FS size: 194052096 bytes (185 MiB, 1504 LEBs), journal size 9676800 bytes (9 MiB, 75 LEBs)
13.298 0.007: [   11.668365] UBIFS: reserved for root: 4952683 bytes (4836 KiB)
13.309 0.011: [   11.674530] UBIFS: media format: w4/r0 (latest is w4/r0), UUID B075341D-2EBD-4651-A232-86D7E8E0A3B9, small LPT model
13.389 0.080: Set alignment to 3
13.403 0.014: Setting hostname
13.668 0.265: Configuring network interfaces... [   12.038726] davinci_mdio davinci_mdio.0: resetting idled controller
13.678 0.010: [   12.045501] net eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=davinci_mdio-0:00, id=7c0f1)
13.684 0.006: [   12.055511] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
13.845 0.161: [   12.218597] turning CAN driver on
13.851 0.006: [   12.222229] ti_hecc ti_hecc can0: setting CANBTC=0x30049
13.884 0.033: done.
13.936 0.052: kernel.print-fatal-signals = 1
INIT: Entering runlevel: 5
14.116 0.164: Starting system message bus: dbus.
14.169 0.053: Starting Connection Manager
14.484 0.314: Starting syslogd/klogd: done
14.941 0.457: Starting watchdog: dbus[1050]: [system] Activating service name='fi.w1.wpa_supplicant1' (using servicehelper)
15.362 0.421: dbus[1050]: [system] Successfully activated service 'fi.w1.wpa_supplicant1'
15.668 0.306: [   14.039306] libphy: davinci_mdio-0:00 - Link is Up - 100/Full
15.675 0.007: [   14.045410] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
16.483 0.807: watchdog.
16.569 0.086: Starting crond: OK
16.587 0.018: ****** Prepare & Starting Application meta-bpp3 ******
19.513 2.926: Starting simple-upnpd
20.015 0.502: [9;0]21.501 1.486: ccgx login: Stopping Bootlog daemon
INIT: no more processes left in this runlevel
⚠️ **GitHub.com Fallback** ⚠️