Testing - venice1200/MiSTer_tty2oled GitHub Wiki
Test your Display
You can test your Display with the Arduino's Serial Console or from the MiSTer's command line.
The following Commands can be used to test the connection:
Text | Function |
---|---|
CMDCLS | Clear Display |
CMSORG | Show Display's Startup Screen |
CMDBYE | Show Sorgelig's Icon |
Use MiSTer's Command Line
Connect to the MiSTer command line interface (cli) via ssh or F9.
Type echo "CMDSORG" > /dev/ttyUSB0
to send the Command CMDSORG
to the tty2oled Display connected to /dev/ttyUSB0
.
If your device uses another Device Interface, use this Intrerface.
Use Arduino's Serial Console
You can test your Display by sending text from the Arduino's Serial console to the connected Display.
Set the Console to 115200 baud with LineFeed (Newline) \n
activated.
Just type one of the Commands above and send it.
Use the tty2oled script with Command Line Parameter
- Parameter 1: /dev/ttyUSBx Device
- Parameter 2: Baudrate (Standard 115200)
- Parameter 3: SD or USB Mode
Examples:
- /media/fat/tty2oled/tty2oled.sh /dev/ttyUSB1
- /media/fat/tty2oled/tty2oled.sh /dev/ttyUSB0 921600
- /media/fat/tty2oled/tty2oled.sh /dev/ttyUSB2 115200 SD