Gallery - venice1200/MiSTer_tty2oled GitHub Wiki
Three of a kind...
d.ti created the fantastic ESP32 based PCB Rev 1.2 for the SSD1322 OLED
Info: ESP32 Wroom 32D MCU, Micro USB Socket at back side, SPI and I2C Sockets for your own Projects.
You can add: MIC184 Temperature Sensor, Buzzer, WS2812 LED and a Tilt Switch.
Links to the free Rev 1.2 Project files:
KiCad Project /
Gerber Files /
BOM /
Schematics /
3D Model
rbz's Couch-Case 😃
rbz is the creator of the great i2c2oled and tty2oled picture viewer.
stefer09 new enclosure.
d.ti created an absolute fantastic ESP32 based PCB and a matching Case for an 3.12" OLED.
Some Infos: ESP32 Wroom 32D MCU, USB Socket at back side, MIC184 Temperature Sensor (if added), SPI and I2C Sockets for your own Projects.
Links to the free Rev1.1 Project files:
KiCad Project /
Gerber Files /
BOM /
Schematics /
Case /
Assembly Instructions
jawler's build. Little Bigger than mine 😃.
d.ti uses his own Case and PCB (KiCad & Gerber) for an 2.8" Display
He sent me an printed Case and a PCB which I use with my test system. Many Thx 😃!
stefer09 uses an 20 Pin OLED from Newhaven with an ESP8266.
The Display Connection Mode (SPI/Parallel) can be changed via Display Pins instead of re-solder tiny resistors.
See Electrical for his connection Scheme.
Mellified's Devkitc V4 solderless & breakout solution.
His MiSTer_SAM Tool supports tty2oled.
Reg's Checkmate 1500 build
WiteWulf got it soldered and working in less than an hour
RealLarry's external Set-Top Case for an 3.12" OLED, see Cases
RealLarry's testing of a 5.5" OLED with GreyScale picture
gojira54 uses the TTGO-T8 PCB
dave18's case with an 128x64 Pixel OLED
Jukk@M's digibox (HDTHUNDER HD5521SR)
My Final?
Testing Hardware (ESP32 Wemos Lolin32, ext. Adafruit SD-Breakout, 3.12" SSD1322)
Hope for some more Pics here.