Serial connection to Blueendless Kimax U35WF device

To connect to serial port of Kimax U35WF connect UART TTL cable at:

• Black Wire GND = ground pin 11 (inside)
• Green Wire TX = pin 7 (outside)
• White Wire RX = pin 6 (outside)

You may use a cable with PL2303 like this one= http://s.aliexpress.com/2Q3eu2Q7
And follow this picture also = http://postimg.org/image/l6xt09hrj

Two types of serial connection:
Port setting: 57600 8n1
screen /dev/ttyUSB0 57600
To end the session, use Ctrl-A,Shift-K.
Another Port setting would be: 9600 8n1

Images from Blueendless Kimax U35WF device