Verified_HATs - up-board/up-community GitHub Wiki
This is a list of HATs that have been verified as working with the UP/UP^2 boards.
NOTE This is NOT a definitive list, just a selection of HATs that have been verified so far by our users.
Please add other HATs here that have been tested with the UP board. Instructions on how to set up and use specific HATs on UP can be added with new pages linked here and under the Hardware section.
Manufacturer | HAT | Status | Verified By | Instructions | Notes |
---|---|---|---|---|---|
Adafruit | Capacitive Touch HAT (MPR121) |
![]() |
Emutex | How-To | |
Adafruit | 16-Channel PWM / Servo HAT (PCA9685) |
![]() |
Emutex | How-To | |
Adafruit | DC & Stepper Motor HAT (TB6612) |
![]() |
Emutex | How-To | |
Adafruit | Triple-Axis Accelerometer (ADXL345) |
![]() |
Emutex | How-To | |
Adafruit | High Accuracy I2C Temperature Sensor (MCP9808) |
![]() |
Emutex | How-To | |
Adafruit | PiTFT 480x320 3.5" TFT (26 pin header) |
![]() |
Björn Reichert | How-To | The touch-input feature has not been verified at this time |
Adafruit | PiTFT Plus 480x320 3.5" TFT (40 pin header) |
![]() |
Björn Reichert | How-To | The touch-input feature has not been verified at this time |
Adafruit | PiTFT 320x240 2.8" TFT |
![]() |
Emutex | How-To | The touch-input feature has not been verified at this time |
Watterott | RPi Display B+ 2.8" 320x240 |
![]() |
Björn Reichert | How-To | The touch-input feature has not been verified at this time |
Olmatic | S.USV UPs & S.USV UPs mobile |
![]() |
Aaeon | How-To | |
Dexter Industries | GrovePi HAT |
![]() |
Emutex | How-To | |
SNOC | RPISIGFOX Shield |
![]() |
Emutex | How-To | |
PiFace | PiFace Digital |
![]() |
LorenzoK | How-To | All the Outputs Works, but the pushbutton can't be read |
XLoBorg | Piborg.org |
![]() |
LorenzoK | Pending |
Manufacturer | HAT | Status | Verified By | Instructions | Notes |
---|---|---|---|---|---|
Adafruit | Capacitive Touch HAT (MPR121) |
![]() |
Emutex | How-To | |
Adafruit | 16-Channel PWM / Servo HAT (PCA9685) |
![]() |
Emutex | How-To | |
Adafruit | DC & Stepper Motor HAT (TB6612) |
![]() |
Emutex | How-To | |
Adafruit | PiTFT 480x320 3.5" TFT (26 pin header) |
![]() |
Björn Reichert | How-To | The touch-input feature has not been verified at this time |
Adafruit | PiTFT 320x240 2.8" TFT |
![]() |
Emutex | How-To | The touch-input feature has not been verified at this time |
PiFace | Digital |
![]() |
All works |