UP Xtreme i11 - up-board/up-community GitHub Wiki
Introduction
This page is specifically written for UP Xtreme i11 based products
Compatibility List:
- UP Xtreme i11 Edge Computing Kit (0000 and 0001 versions) --> The software is pre-installed in this product
- UP Xtreme i11 Edge (0000 and 0001 versions)
- UP Xtreme i11 Board (0000 and 0001 versions)
Hardware Specifications
- Intel® Core™ i7 / i5 / i3 / Celeron® Processor (formerly Tiger Lake UP3)
- Intel® Iris Xe (Intel® Core™ i5 & Intel® i7)/ Intel® UHD Graphics (Intel® Core™ i3 & Intel® Celeron®) Gen 11
- Up to 64GB DDR4 SoDimm
- 40Pin Header
Full Specifications are available on up-board.org website.
Pinout
This board includes a standard 40pin header as most of our UP series platforms.
More information can be found here: 40Pin Header
Extra Features
To check a summary of the I/O features for this board this is a I/O Matrix Overview
Hardware Setup
To get started with the UP Xtreme i11, you will need the following:
- Monitor
- HDMI cable (or another video cable with a HDMI adapter)
- USB keyboard and mouse (use a USB hub should you need to connect more than 2 USB devices)
- PSU: 12V6A PSU (power cord sold separately) or 12V8A PSU (power cord sold separately)
Also, if you need to install/reinstall the operating system, please prepare the following:
- USB flash drive at least 8GB
Software Setup Guides
Operating System
The following setup procedures are for the UP Xtreme i11 based products, which do not come with operating system preinstalled.
You may also follow these procedures when you need to reinstall the operating system.
Install Intel Edge Software Hub package
Software packages from the Intel Edge Software Hub are compatible and validated with our platform. Here are direct links to install the following software packages:
-
Edge Insights for Autonomous Mobile Robots (You can start from step 2 since you have already installed the operating system earlier)
Back to Spec-Matrix-Overview-Core-i Page