UP Squared Pro - up-board/up-community GitHub Wiki
Introduction
This page is for UP Squared Pro based products
Compatibility List:
- UP Squared Pro Edge
- UP Squared Pro Board
Hardware Specifications
- Intel Atom® processor E3950, Intel® Celeron® processor N3350, and Intel® Pentium® processor N4200 platform (formerly Apollo Lake)
- Intel® UHD Graphics
- Up to 8GB LPDDR3
- Up to 64GB eMMC
- 40Pin Header
Full Specifications are available on up-board.org website.
Pinout
This board includes a standard 40pin header as most of our UP series platforms.
More information can be found here: 40Pin Header
Extra Features
To check a summary of the I/O features for this board this is a I/O Matrix Overview
Hardware Setup
To get started with the UP Squared Pro, you will need the following:
- Monitor
- HDMI cable (or another video cable with a HDMI adapter)
- USB keyboard and mouse (use a USB hub should you need to connect more than 2 USB devices)
- PSU: 12V6A PSU (power cord sold separately) or 12V8A PSU (power cord sold separately)
Also, if you need to install/reinstall the operating system, please prepare the following:
- USB flash drive at least 8GB
Software Setup Guides
Operating System
The following setup procedures are for the UP Squared Pro based products, which do not come with operating system preinstalled.
You may also follow these procedures when you need to reinstall the operating system.
Install Intel Edge Software Hub package
Software packages from the Intel Edge Software Hub are compatible and validated with our platform. Here are direct links to install the following software packages:
-
Edge Insights for Autonomous Mobile Robots (You can start from step 2 since you have already installed the operating system earlier)
Back to Spec-Matrix-Overview-Atom Page