UP Squared 6000 - up-board/up-community GitHub Wiki
Introduction
This page is for UP Squared 6000 based products
Compatibility List:
- UP Squared 6000 Edge Computing Kit --> The software is pre-installed in this product
- UP Squared 6000 Edge
- UP Squared 6000 Board
Hardware Specifications
- Intel Atom® x6000E Series, Intel® Pentium®, and Intel® Celeron® N and J Series processors (formerly Elkhart Lake)
- Intel® UHD Graphics
- Up to 16GB LPDDR4
- Up to 64GB eMMC
- 40Pin Header
Full Specifications are available on up-board.org website.
Pinout
This board includes a standard 40pin header as most of our UP series platforms.
More information can be found here: 40Pin Header
Extra Features
To check a summary of the I/O features for this board this is a I/O Matrix Overview
Hardware Setup
To get started with the UP Squared 6000, you will need the following:
- Monitor
- HDMI cable (or another video cable with a HDMI adapter)
- USB keyboard and mouse (use a USB hub should you need to connect more than 2 USB devices)
- PSU: 12V6A PSU (power cord sold separately) or 12V8A PSU (power cord sold separately)
Also, if you need to install/reinstall the operating system, please prepare the following:
- USB flash drive at least 8GB
Software Setup Guides
Operating System
The following setup procedures are for the UP Squared 6000 based products, which do not come with operating system preinstalled.
You may also follow these procedures when you need to reinstall the operating system.
Install Intel Edge Software Hub package
Software packages from the Intel Edge Software Hub are compatible and validated with our platform. Here are direct links to install the following software packages:
-
Edge Insights for Autonomous Mobile Robots (You can start from step 2 since you have already installed the operating system earlier)
Back to Spec-Matrix-Overview-Atom Page