Introduction

This page is for UP 710S based products

Compatibility List:

• UP 710S Edge
• UP 710S Board

Hardware Specifications

• Intel® Processor N97 / Intel® Processor N100 (formerly Alder Lake N)
• Intel® UHD Graphics Gen 12
• Up to 8GB LPDDR5
• Up to 128GB eMMC
• Wafer connectors for GPIO, UART, I2C, SPI, and RS-232/422/485
• M.2 2230 E-key slot

Full Specifications are available on up-board.org website.

Pinout

This board does not include a standard 40pin header as most of our UP series platforms.

Please refer to the user manual for additional details on how to use them: UP 710S User manual

Extra Features

To check a summary of the I/O features for this board this is a I/O Matrix Overview

Hardware Setup

To get started with the UP 710S, you will need the following:

• Monitor
• HDMI cable (or another video cable with a HDMI adapter)
• USB keyboard and mouse (use a USB hub should you need to connect more than 2 USB devices)
• PSU: 12V6A PSU (power cord sold separately)

Also, if you need to install/reinstall the operating system, please prepare the following:

• USB flash drive at least 8GB

Software Setup Guides

Operating System

The following setup procedures are for the UP 710S based products, which do not come with operating system preinstalled.

You may also follow these procedures when you need to reinstall the operating system.

• Ubuntu 24.04
• Yocto Project
• Windows

Install Intel Edge Software Hub package

Software packages from the Intel Edge Software Hub are compatible and validated with our platform. Here are direct links to install the following software packages:

• Edge Insights for Vision

• Edge Insights for Autonomous Mobile Robots (You can start from step 2 since you have already installed the operating system earlier)

Back to Spec-Matrix-Overview-Atom Page