Hardware_Specification_UPX_i11 - up-board/up-community GitHub Wiki

Datasheet

SoC

Memory

  • 2x DDR4 2 channel SO-DIMM VERTICAL MAX 64GB @ 3200MT/s

Graphics

  • Intel® Iris® Xe Graphics – i7-1185GRE/i5-1145GRE
  • Intel® UHD Graphics for 11th Gen Intel® Processors-i3-1115GRE/ Celeron 6305E

Video Output

  • 1 Full HDMI 2.0 – 4K (3840x2160) @ 60 hz
  • 1 DisplayPort 1.4/USB 4.0 (Type C) – 4K (4096x2160) @ 60 hz
  • eDP display – 4K (4096x2160) @ 60 hz

Storage

  • via 1x SATA 3.0 CONN with POWER CONN / 1xM.2 2280 M key (combo 2x PCIE[x1]) NVME

Network

  • 1 x 1GbLAN (i219), 1x 2.5Gb LAN (i225), *vPRO is only available in i7/i5 CPU

USB

  • 3x USB 3.2 Gen 2 (Type A)
  • 1x USB 2.0
  • 1x USB 4.0 (Type C)

SATA

  • Full-size SATA3 port (SATA 6Gb/s)

Audio

  • HDMI Audio x 1, DP Audio x 1, Soundwire Codec for Audio Out/Mic In/, I2S

Expansion Slot

  • 1 M2 3052 slot B-key (M.2 slot supports PCIe Gen.3)
  • 1 M2 2280 slot M-key (M.2 slot supports PCIe Gen.3)
  • 1 M2 2230 slot E-key (M.2 slot supports PCIe Gen.3)

Digital I/O

The UP Xtreme i11 has connectors for GPIO/peripherals:

  • HAT connector: pin-compatible with Raspberry Pi Pin position

2 x M5 header

  • 2x Fintech F81801 RS232/422/485

HAT Connector

Each of the HAT pins has a dual function, a standard GPIO in/out mode, and a function mode.

On the board start, all the pin are set in function mode by default but that can be changed within the bios menu see 40-pin multi-function I/O header

  • 28 GPIO-capable pins
  • 2 I2C ports:
    • mode supported Standard, Fast, Fast Plus, High Speed)
  • SPI0:
    • max speed 25MHZ
    • 2 Chip enable *supported modes 0 and 2
  • SPI1:
    • max speed 25MHZ
    • 3 Chip enable
    • supported modes 0 and 2
  • UART1
    • max baud rate 3Mbaud
    • hardware flow control
  • 3 PWM output (not currently supported due to limitation on Intel PWM driver for WHL-U SoC)
  • 1 i2s port (not currently supported due to lack of I2S drivers from Intel for WHL-U SoC)

RTC

  • Present

FPGA

Intel® MAX® 5 CPLD

Board Dimension

  • 120 mm × 122.0 mm

Power Supply Specifications

  • 12V wide range with lockable connector, validated PSU: [https://up-shop.org/up-squared-pro-psu-72w.html]

Related links