Project Folder File Description - tvelliott/jPCBSim GitHub Wiki

Individual projects are contained in their respective folders directly under the user-defined Projects folder. A typical project folder might contain the following files:

default_pcb.m (output from hyp2mat conversion of a .hyp file. jPCBSim project geometry file)

default.s1p (jPCBSim output. touchstone format for a 1 port device)

et (broadband gaussian pulse data generated by openEMS on startup)

ht (broadband gaussian pulse data generated by openEMS on startup)

openems_simulation.xml (generated by jPCBSim. This is openEMS/AppCSXCad simulation file format. Contains geometry, mesh, simulation configuration)

PEC_dump.vtp (openEMS output. PEC copper as seen by openEMS FDTD engine. Can be viewed for debugging with paraview)

port_it1 (openEMS time-domain current measurement for port 1)

port_ut1 (openEMS time-domain voltage measurement for port 1)

sim_configuration.cfg (jPCBSim project configuration file)