STL Export Settings - turnracing/turnracing-diy GitHub Wiki

To export your bodies from Fusion 360 for 3D Printing, simply find the body you want to export, right-click it and select "Save As Mesh".

Save As Mesh

You should consider the output resolution that you use. For general purposes, you can simply use the built-in "High" refinement option.

However, if you want the best possible print quality, especially if you're using a printing service such as JLCPCB with high-resolution printers then it's recommended that you use the following settings.

Do not upload STEP files for 3D printing as often they will be converted in a low resolution, as shown below.

This information was sourced from - https://www.fusion3design.com/exporting-stl-files-for-best-3d-print-quality

Recommended Export Settings

  • Surface Deviation = 0.004479 mm
  • Normal Deviation = 10.000
  • Maximum Edge Length = 89.58237 mm
  • Aspect Ratio = 21.500

Export Settings

Low Resolution Example

Example of a low resolution export

High Resolution Example

Example of a high resolution export