Material Lists and Libraries - timejunky/Snapmaker-Information-Pool GitHub Wiki
General
Have a look in Luban at first.
| Laser Module Output Power | 20w | 40W | 10W |
|---|---|---|---|
| Laser Electric Power | 65W | 125W | |
| Laser Type | 450 - 460nm Semi-conductor | 450 - 460nm Semi-conductor | |
| Laser Spot Dimension | 0.08 x 0.1 | 0.1 x 0.15 | 0.05 x 0.2 |
| Air Assist | Y | Y | N |
| Camera Capture | N | N | Y |
| SM | A350/ A350T/ F350 | A250/ A250T/ F250 | Artisan | RAY |
|---|---|---|---|---|
| Work Area | 230 mm x 250 mm | 320 mm x 350 mm | 400 mm x 400 mm |
Materials not to laser!!!
Very important! https://cpl.org/wp-content/uploads/NEVER-CUT-THESE-MATERIALS.pdf https://www.justlaser.com/en/blog/materials-that-cannot-be-processed-with-a-laser/
Warning: Never laser if you are not on side!
The Definitive Guide to Laser Engraving and Cutting with the 10W High Power Laser Module
20/40W Laser
Snapmaker 2.0
Artisan
LightBurn Library
This took me a while to collect and also to merge with other information. Any donation are appreciated! https://paypal.me/3dJunky?country.x=LU&locale.x=en_US
A donation would be also if you provide your own library for Snapmaker 2.0 or Ray to me for merging.
Material List
- https://support.snapmaker.com/hc/en-us/articles/4417392416919-3-Material-Library
- Engraving Guide for Stainless Steel by Snapmaker (English) https://support.snapmaker.com/hc/en-us/articles/22422547811351-Color-Laser-Marking-on-Stainless-Steel-Using-the-Snapmaker-Ray-40W-Laser-Module-Part-1
- Engraving Guide for Stainless Steel (German) https://www.materialmagazin.com/index.php/staehle/glueh-und-anlassfarben
- Some Cutting Parameters from 3DMart https://3dmart.com.tw/en/shop/snapmaker-20w-40w-laser-module-with-air-assist%20400%20mm%20x%20400%20mm