Configuration of HTTP, DNS and DHCP Server in the same network.

STEP 1 : Open the CISCO Packet Tracer.

STEP 2 : Setup the network using servers, switch and systems.

STEP 3 : Set up the IP addresses for the servers and systems in the network.

STEP 4 : Edit the HTML page of server 1.

STEP 5 : Enter the IP address of the server in which the HTML page was edited, in the web browser of any of the system in the network.

STEP 6 : Configure the DNS server in server 2.

STEP 7 : Setup the gateway and DNS server in any one of the system.

STEP 8 : Open the web browser of the system and enter the domain name that you had given in the server 2 and check for the result.

STEP 9 : Setup the gateway for the server 1 in DHCP.

STEP 10 : Change the IP addresses of the systems from static to DHCP. 

STEP 11 : Enter the IP address or DNS name in the web browser of any of the system.