Board: WSN430 - thomaseichinger/RIOT GitHub Wiki
Hardware
MCU
| MCU |
TI MSP430F1611 |
| Family |
MSP430 |
| Vendor |
Texas Instruments |
| Package |
64 QFN |
| RAM |
10Kb |
| Flash |
48Kb |
| Frequency |
8MHz |
| FPU |
no |
| Timers |
2 (2x 16bit) |
| ADCs |
1x 8 channel 12-bit |
| UARTs |
2 |
| SPIs |
2 |
| I2Cs |
1 |
| Vcc |
2.0V - 3.6V |
| Datasheet / Reference Manual |
Datasheet |
| User Guide |
User Guide |
Radio
There exist two versions of the board. Version 1.3b presents an open 868 MHz radio interface while version 1.4 has an IEEE 802.15.4 radio interface at 2.4 GHz.
Version 1.3b
| RF Chip |
Texas Instruments® CC1100 |
| Frequency Band |
300-348MHz, 400-464 MHz, and 800-928 MHz |
| Standard compliance |
DASH7 compliant |
| Receive Sensitivity |
-94dBm typ |
| Transfer Rate |
500kBaud |
| RF Power |
-30dBm ~ 10dBm |
| Current Draw |
RX: 14.4mA TX: 16.9mA Sleep mode: 400nA |
| RF Power Supply |
2.1V ~ 3.6V |
| Antenna |
Dipole Antenna / PCB Antenna |
| Datasheet |
Datasheet |
Version 1.4
| RF Chip |
Texas Instruments® CC2420 |
| Frequency Band |
2.4GHz ~ 2.485GHz |
| Standard compliance |
IEEE 802.15.4 compliant |
| Receive Sensitivity |
-95dBm typ |
| Transfer Rate |
250Kbps |
| RF Power |
-25dBm ~ 0dBm |
| Range |
120m(outdoor), 2030m(indoor) |
| Current Draw |
RX: 18.8mA TX: 17.4mA Sleep mode: 1uA |
| RF Power Supply |
2.1V ~ 3.6V |
| Antenna |
Dipole Antenna / PCB Antenna |
| Datasheet |
Datasheet |
More information
FIT/IoT-LAB Hardware