TILT SWITCH - thilo-hub/Lua-RTOS-ESP32 GitHub Wiki
| What | Comments | |
|---|---|---|
| Identifier | TILT_SWITCH |  |
| Interface | GPIO | |
| Provides | on | 1 = switch active 0 = switch inactive |
| Properties | none | |
| Callbacks? | yes | |
| Datasheet |
- Hardware pull-ups are not required for switch.
-- Attach a tilt switch to GPIO26
s = sensor.attach("TILT_SWITCH", pio.GPIO26)
-- Register a callback. Callback is executed when some sensor property changes.
s:callback(
function(data)
if (data.on == 1) then
print("on")
elseif (data.on == 0) then
print("off")
end
end
)