The elv_max interface sends commands via TCP to a MAX Cube from ELV of EQ3. The protocol is not public, the interfave uses the pymax library (https://github.com/ercpe/pymax) The elv_max interface supports auto detection of your cube device. This is the default setting (host=discover). You can also configure a specific serial number to target a specific MAX Cube, in case you have several of them. The codeset file uses the implemented functions only- The interface itself is uni-directional. No trigger are defined.

The settings are self explained, please use "discover" as a host name (default setting), if you want the interface to discover your MAX cube. Please leave the timetoclose setting to -1, the cube can't hadle to many connect requests. If cube/valve/heater commands have been set, you need to reread the settings from the cube. For that you need to clear the cache first. Use the clearcache codeset command for that.