Configuration - thezenox/breezedude GitHub Wiki

Location (GPS coordinates), altitude and sensor orientation are set via a text file on the device and can be adjusted manually or via the configurator.

To do so, connect the Breezedude to your computer via USB, press reset once and read in the "settings.txt" file on the mass storage device. Then download the revised configuration and copy it back to the Breezdude.

The configuration can also be edited using an Android cell phone or tablet. It is best to prepare the file in advance and only copy it to the Breezdude. In my case, the Android device could not use the mass storage without formatting it first. This should be possible without any problems and should also work afterwards (red LED must remain off). Depending on the file manager/app used, the file is not always written properly when editing (opening directly on the Breezedude drive, the file exists but is 0kb in size). Therefore it is better to just copy it, that works better. If you want to do this with your cell phone, it is best to try out the process at home in peace.