Camera: LongPlus X07 - themactep/thingino-firmware GitHub Wiki

LongPlus X07

https://longplus.com/products/longplus-b1-wi-fi-security-camera-for-home-security-2-pack-

Hardware

• SoC: Ingenic T31N (64MB)
• Image Sensor:
  • GC2063 (2MP)
  • JXF23 (2MP)
  • MIS2008 (2MP)
• Wi-Fi Module: RTL8189FTV (SDIO)
• Flash Chip: NOR 16MB
• Power: 5V DC microUSB

Installation

1. Undo two screws on the back of the ball, rotate the ball face up, remove the to part of the ball.
2. Undo two screws holding the PCB to get access to the flash chip on the front side of the PCB.
3. Clip the flash chip and use a CH341A programmer to install the firmware.